| This blog is written by camps764 | 8 entries so far |
-
The New Yankee Workshop - Chapter 2 The Workbench #3: Adding the vise, the dogs and backer blocks - finishing up the bench
Rather than ordering a bench screw from Woodcraft, I ended up buying a 10” “woodworke...
-
The New Yankee Workshop - Chapter 2 The Workbench #2: The bench dog assembly
In the last blog I covered the initial cutting and assembly of the New Yankee Workshop workbench ...
-
The New Yankee Workshop - Chapter 2 The Workbench #1: Beginning - Preparing the Materials and Making the first cuts
For those of you that haven’t been following – I recently decided that I would work t...
-
The New Yankee Workshop - Chapter 1 The Medicine Cabinet #5: Finishing up the first project - and overall lessons learned
Sorry about the delay in posting this, life got away from me and it’s been hard to find tim...
-
The New Yankee Workshop - Chapter 1 The Medicine Cabinet #4: Medicine Cabinet - Part 3 The Door
With the case constructed and the face frame attached, it was time to turn my attention to the do...
-
The New Yankee Workshop - Chapter 1 The Medicine Cabinet #3: Medicine Cabinet - Part 2
After dry fitting up the case to ensure the finger joints had a good fit I needed to pull it back...
-
The New Yankee Workshop - Chapter 1 The Medicine Cabinet #2: Medicine Cabinet - First Project Day 1
A journey of a thousand miles must begin with a single step…Lao Tzu After writing the in...
-
The New Yankee Workshop - Chapter 1 The Medicine Cabinet #1: The New Yankee Workshop - A Skill Development Journey
Like many (I assume) my woodworking started as a tentative hobby. Something I’d always bee...
