LumberJocks

cabinetmaster's Blog

  • Advertise with us
This blog is written by cabinetmaster | 7 entries so far

Latest Entry

Eye Brow Windows #3: Building the Windows

06-21-2009 05:27 AM by cabinetmaster | 5 comments »

Ok, now for the actual building of the eyebrow windows. This is where we left off. Remember that the side pieces are 3/8” plywood 43” tall, 1 1/2” at the bottom tapered to 33” at the top. After attaching the side pieces, I was able to measure around the circumference of the arch and determine the length of the top pieces. I used 3/8” bendy board (flex-core) and cut a slight angle on each end where it attaches to the plywood on the sides. The bendy board goes from 33” on each end to 43” out in the very center. I again radiused this off the template furnished by our installers. I then glued the bendy board to the plywood with titebond III glu...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase