bushmaster's Blog

  • Advertise with us
This blog is written by bushmaster | 7 entries so far

Latest Entry

Scrap Iron Wood |Lathe #7: Pictures of the completed project.

05-22-2016 04:35 AM by bushmaster | 7 comments »

Just a few pictures of the completed project. ! ! In this blog I never mentioned how I made the tailsock as I had used it from the first lathe I made. Is is made from a section of rectangular steel tube, 1/4 wall, A Vee was cut out of opposite sides and then welled back together. The top tube was a piece of seamless drill pipe from the oil field. The internal parts was machined from solid stock. The number 3 morris taper was a sleeve that shrunk fit in. For those that haven’t seen the first video I made after the lathe was finished can be viewed by this link.

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics