burkelyn's Blog

  • Advertise with us
This blog is written by burkelyn | 2 entries so far

Latest Entry

Shop Safety #1: knee switch my version Dec 2009

01-02-2010 02:03 AM by burkelyn | 4 comments »

<div></div> I’d like to detail exactly what I did so if anyone wants to recreate this for their saw they would have some exact guidance. Firstly I noticed that the power switch was on the left… I felt this was dangerous. I knew that the adjustment for the saw blade angle was on the right, but I felt it was also necessary to move the power switch to the right. I notice that the angle iron which supports the rail on my saw had two predrilled and counter sunk holes on the far right so the move was on. I have only a small table on my saw and walking around to change the angle was no big deal as I don’t often do that anyway. I hired an electrician to do this a...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics