LumberJocks

brianl's Blog

  • Advertise with us
This blog is written by brianl | 22 entries so far

Latest Entry

Panel Raising Plane #3: The sides

925 days ago by brianl | 1 comment »

In order to make the plane into a skew cut, I had to saw off the sides. Doing so wasn’t the easiest thing. I was pretty happy with my results though – keeping within 1/16 of where I wanted to be almost the entire way. Now that I’ve cut the skew, it’s time to reattach the sides so I can appropriately size the iron! So, I drilled a few 1/4” holes so I can use dowels to align everything. This way I can assemble the plane and properly fit the wedge, iron, etc…Once it was all assembled it looked a little bit better. I tapered all of the dowels, that way it held together nicely.Finally I took some time to start sketching out what I wanted the sole to ...

Read this entry »

Older Entries

View all 22 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase