LumberJocks

Ben Miller's Favorites

  • Advertise with us
View mbs's profile

Walnut Leopardwood rocking chair #1: My first Rocker from Hal Taylor's plans

11-14-2011 05:55 AM by mbs | 4 comments »

My daughter is pregnant and I though I surprise her with a rocker for her first born. The rocker will be made of leopardwood and walnut. I got 8/4 ash for the laminate forms. I’ll have about 6 hours a week to work on it so it will take most of the winter. I haven’t ever made a rocker so I bought the plans from Hal Taylor and I’m already glad I didn’t try it on my own. Day oneI bought some 1/2” baltic birch for the chair patterns, cut them on the bands...

Read this entry »


View Greg Wurst's profile

Table Saw Mobile Workstation #1: I love it when a plan comes together...

04-21-2008 11:00 PM by Greg Wurst | 21 comments »

Awhile back Wood Magazine had an article on building a mobile outfeed table that would fit over your table saw. Since I need all the space in my garage I can get, I went ahead and built one that would fit over my table saw to give me some much needed work space and a handy outfeed table. I thought this was pretty spiffy and a great use of space. As I always do I look at the latest project posts on Lumberjocks looking for inspiration for my next project. Whilst browsing I came ac...

Read this entry »


View degoose's profile

End Grain Cutting Board LJ Class 006 #3: Excuses, excuses...

05-08-2011 09:35 PM by degoose | 12 comments »

Please pardon the delay… my dog ate my homework…Seriously though the last few weeks have been very hectic around here with the launch of the new line and two woodworking show attendances… I have a small hiatus before the next show in Brisbane.. where I will be demonstrating the TWC on behalf of another Distributor in Brisbane… it will be a wonderful time… just turn up … do the demos and go home…no unpacking or packing up…As to the first lesson o...

Read this entry »


View tyka's profile

Combo Drum Sander #1: Concept and making the drum

02-20-2011 06:48 AM by tyka | 11 comments »

This is my first blog and I hope it will go over well. This sander was inspired by models on the Internet but mostly by Blake: http://lumberjocks.com/projects/7641 and by Bob: http://lumberjocks.com/Bob3418/blog. I would like to thank them both for their posts. Without them this project would have been very difficult to complete. Concept: My intentions are to make a 20” +/- wide drum sander that will easily switch from thickness to surface sanding. I would like to be able to reduce stoc...

Read this entry »


View Armand's profile

Mortise and Tenon Jig

04-24-2011 04:01 PM by Armand | 18 comments »

This is the newest addition in my shop. I realized it was necessesary to build this one for my upcoming projects that will require a lot of M/T joineries. Please watch my video at youtube to see how it works. Hope you find my jig interesting. Thanks

Read this entry »


View Hoakie's profile

In the Shop #4: Inspired to do something new... Hand-cut Dovetails

02-09-2011 05:09 AM by Hoakie | 28 comments »

Is it odd that every time I get a new power tool to perform a task, I get an urge to try and do it by hand as well? Anyway it seems to happen to me a lot. This year I received a dovetail jig for Christmas and was up and running cutting half-blind dovetails in no time. However, I have been wanting to learn techniques working with hand tools for a long time to expand my arsenal. Over the past few weeks I’ve been eying some of the entries to the Winter Challenge, the videos of the Ja...

Read this entry »


View patron's profile

simple quick box #1: TUTORIAL , SIMPLE BOX , FAST

06-20-2010 08:23 AM by patron | 47 comments »

after i posted this box , which took a total of about 5 hours in time , but two days , because i didn’t have the handle and clasp i got enough comments to post a tutorial on it’s building process , so here goes . thanks for looking . this is the finished box.i start with the wood for the whole box straight and milled to thickness all the same ,the top and bottom are wider here ,and the length of the body must be long enough ,to take the width into account for the ends .i cu...

Read this entry »


View newTim's profile

Secrets of the String Box Revealed #1: Intro and Invitation

08-25-2010 07:10 AM by newTim | 14 comments »

This summer’s projects have been boxes. Lots and lots of boxes. Somewhere along the way I got the idea of combining the wrapping technique with a simple inlay to see how hard it would be to align the lines all around the box. In other words, at the corners. Turns out it is not that hard to do. So I’ve been experimenting. I’ve posted the first completed boxes as a Project and will post more upon completion. The photos below give an overview of this technique and the pi...

Read this entry »


View knotscott's profile

*DELETED*

12-15-2009 10:42 PM by knotscott | 34 comments »

DELETED

Read this entry »


View SPalm's profile

Steps Cutting Board Version 2 (Two Step)

08-18-2010 03:03 AM by SPalm | 67 comments »

This is a second generation Steps cutting board made out of walnut, maple, and cherry. The first Steps board I made used a basic square with edge of maple and cherry to make it a block and a notch to do the stepping. I wanted to try to make a stepping board using the hex Tumbling Block design, and this is what I came up with. In order to make the hex do the stepping, I needed to notch all three sides, as can be seen in the Sketchup drawing. The cool thing here is that it steps in two di...

Read this entry »


1 2 next »
11 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase