| This blog is written by bluchz | 18 entries so far |
-
More kitchen cabonets #2: Ahh it's finally starting to look like a kitchen again
Well i have finally gotten back on the kitchen remodel. It started with some demo And then rea...
-
Mom's kitchen Cabinets #6: Base cabinets installed......
Finally got the base cabinets installed. This is the 2nd longest kitchen build in history!!!!!! T...
-
Planing a cutting board
OK everybody get a good laugh out of the way right here at the start. I decided to make my first ...
-
Mom's kitchen Cabinets #5: Ahhh the drawer is made!
OK so the day wen well. I found the directions for the Blumotion drawer slides, despite the blue ...
-
Mom's kitchen Cabinets #4: Today is for drawer making!
Today i will be attepting to adjust the new dovetail jig and then cutting all the drawer sides, f...
-
Oak Burls?
It seams in NC i can find oak burls in the woods. I log for a living. Is there any woodworking us...
-
Mom's kitchen Cabinets #3: The Mock up Face frame, doors and drawers.
Here is the mock up of the door and drawer fronts for the kitchen cabinets. These are paint grade...
-
Mom's kitchen Cabinets #2: Step #2 base cabinet boxes
I had a rainy day and couldn’t work, so i got to spent about 4 hours making the boxes for t...
-
Mom's kitchen Cabinets #1: Hmmm might be a bad start.
This will start with a question for the cabinet guys. I got 3/4” birch ply and 1/2” m...
-
Maple stump/crotch #1: In the beginning
In the beginning! this is the MAple stump left i found at work one day. The guy i was cutting thi...
-
More kitchen cabonets #1: part 2 the Island
Well i got the island out of the shop and into the kitchen today. Now i need to order hardware( h...
-
Bandsaw alignment
OK i bougt a rockwell 14” bandsaw used. Everything isinworkingorder but i can’t seem ...
-
Tool foundbut, some parts are missing
I have found a bandsaw (walker turner bandsaw Ser#19639) the top pulley is missing. Will it be to...
-
Wood pile
While at work the other day i realized that i might be “sitting on a gold min.” Well ...
-
Another New Yankee Router Table #2: Flip top pic ture and finished fence
here is the pic of the flip top mentioned in part 1.Gimick or innovation? , you decide and tell m...
-
Another New Yankee Router Table #1: Beginning, middle, and almost finished maybe i should've.....
Maybe i should’ve started this blog sooner? Anyway I ordered Norm’s delux router tabl...
-
Ahhh the seven stitch cedar pencil box
The box is almost ready for glue up. My daughter wanted to make something and i had some small ce...
-
My new kitchen cabinets
Out of work logger gets bored and makes his own kitchen cabinets. This is how they turned out...
