Hey everyone, It was suggested that I start a discussion on how to find and harvest burls. Please give your input also. I don’t deal with straight grain that often. I cut and sell burls for a living so here is what I know. It is illegal to harvest a burl without permission. of course if it is on your own property you can give yourself permission. What I do is put an ad on Craig’s list saying I want your burls. Most people don’t know what burls are. So you don’t get that many calls....
This Week I show you how to make a folding out feed table for your table saw. This design was based after an article and plan found in a 2009 issue of Woodworker’s Journal Magazine. Originally the plan was designed for a Cabinet saw with a Biesemeyer Fence System, so I had to make some slight modifications for my Porter Cable Saw. In this 3 part video series I show you a step by step on building this project as well as talk about the modifications I had to make. The Article and plans ca...
I recently finished working on a cutting algorithm app for the iPad and iPhone called Smart Cutter, and wanted to share the app with every one hoping get some feedback from carpenters and wood workers. Smart Cutter finds the maximum number of small pieces cut from a larger sheet of paper with minimum scrap. It employs a state of the art algorithm to generate the maximum number of small pieces cut from a larger sheet of paper, wood, cloth or any other material, with minimum waste. Whether y...
What Is Burl? I have discovered that this question is the most searched question for burls on the internet. Over 140,000 times world wide per month. So I read what Wikipedia’s definition is and found out that they are not clear and in some details are wrong in their definition. So I am going to attempt to clear the muddy waters. First of all Wikipedia says: “A burl (American English) or bur or burr (used in all non-US English speaking countries) is a tree growth in which the grain ha...
After posting a few of these neat little calls I thought some other folks might like to know how to make them. They are an easy project and another way to use some of that scrap wood. The easiest way to make a scratch box is to have a dedicated mortiser set up with a 1/2”cutter but since I don’t have one here is how I do it. If you do have one you can quickly see how to use it to accomplish what I am doing. I start with a 1 & 5/8”“x4” piece 1/2” t...
Along with Woodworking, I enjoy a new hobby, Screen Printing T-shirts. I started a New Foundation for woodworkers Across the globe to unite and connect. And I am starting to print T-shirts for the UFOWW and found a need for a screen printing press. So here is a look at that build Also I had a short follow up on some notes about the press and why im posting a day early..
Well, thanks to the comments and questions I have gotten I dug through my pics to find one I had on how to make a pot call. So for the folks that want a quick tutorial here we go. A pot call is basically a shallow dish containing two ledges inside. One is cut into the rim to hold the playing surface while the second is a ring left in the center raised to clear the bottom of the pot and still leave a space between the sound board that rests on it and the playing surface above it. One thi...
Recently I posted a video covering common woodworking joinery ( http://www.youtube.com/watch?v=zqXLYe783qw ) with the help of a few friends. In that video I talked to you all about making finger joints on the table saw and showed you a finger joint jig in the process. Well as I promised, here is the complete build process of that Jig. Table Saw Finger Joint Jig Also a little reminder about the 2nd Annual Whirligig Wars. It is almost here!! The event Runs from July 10 –...
Here is another short video of what I’m up to, trying to stay busy which doesn’t seem to be a hard aspect in my life.Thanks for having a look. Paul
As you may know, I am currently working on a bookcase job. While it is only 6ft on one side and 8 on the other with a 45 cab in the corner. It is still big for my shop. It is the first cabinets I have done in a couple of years and is very enjoyable project so far. I have been moving this pile of wood around for 2 weeks and I am over it. There is a little bit of everything there. A chunk of padauk, walnut, rosewood, and some zebrawood. I think there are some others, but do...
- My Journey As A Creative Designer - Woodworking and Beyond - 1828 parts
- Extremely Average - 324 parts
- Toy costruction - 131 parts
- A journey into the workshop. - 115 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 91 parts
- Daily Update - 87 parts
- Shop stuff - 85 parts
- Life as an Amateur Woodworker - 82 parts
- Sheila Landry (scrollgirl) - 1853 entries
- dbhost - 452 entries
- frank - 417 entries
- degoose - 398 entries
- Ecocandle - 325 entries
- mafe - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- Dave Rutan - 275 entries
- robscastle - 263 entries
- William - 258 entries
- shipwright - 258 entries
- A Slice of Wood Workshop - 233 entries
- bandit571 - 229 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries