When a viewer sent me a comment asking if I could make a First Aid Cabinet for the workshop, I thought to myself. “Yea what a perfect project to do”, because I am setting up the new shop, and it was the one thing missing. The First aid Cabinet was made almost entirely out of Pallet Wood. Oh yea! my first Pallet Project! http://www.asimpledesignofocala.com – Websitehttp://www.ufoww.com – The United Federation of Woodworkers Member Sitehttp://www.twitter...
The one Project Video I get asked the most to make is how to build a crosscut sled for the Tablesaw. Well there are a lot of videos out there on making a Cross cut sled, so this is my take on it. I hope you can take something from this video and use it in your shop
Well I finally finished the Tablesaw Base, trying to film during rain storms is almost impossible with the ambient noise from the rain hitting the metal roof.. but I waited it out, and am very happy with the outcome.. Here is a look at the final steps of building this base
Recently I had a need to build a new table saw base for my saw. Rather than just building a simple replacement base, I opted to build one with lots of storage potential. This new base measures 6 feet long by 2 feet wide, which gave me good reason to move over to the new shop building. I haven’t yet finished the new shop set up ( haven’t even started) but this build is a great start giving me lots of options for storage potential… This build is a 2 part project. So be sure to...
In this video I show you how to make a simple yet elegant lift lid box. These little boxes can be made with with different woods to give them their own character, and due to the simplicity they can be made in batches.. They make a great gift to give someone. The boxes in the videos are made from Spalted Pecan, White Oak, & Mahogany. Each Box was finished with 2 coats of Danish Oil to bring out the natural beauty and color of the woods. Also in the video I talk about an upcoming project...
Well this week was a busy week and I didn’t get to make a video project for this past Wednesday. So I thought I would Share this quick project video with you today. For a recent project I needed to make a larger version of an angle gauge to allow me to get the exact angle of an inside corner of a corner shower. After borrowing one from a fellow woodworker, I decided I needed one for the shop. Here is a look at making the simple but very useful over sized angle finder. These are commonly...
One of my favorite pass times is playing pool (Billiards) and I thought this would be a cool project to share with you. If you have a pool table in your house or man cave or if you know someone who owns a pool table this would be a great gift to give… Also be sure to check out and subscribe to my new Youtube Channel “The Rundown” to get follow ups on my main project videos, that are on my main channel, as well as the rundown on small easy to build projects, ...
Hey everyone, I am introducing my new Youtube channel called the A.S.D. Rundown! This channel is in association with my main main channel, but will be specific to doing project follow ups,simple shop projects as well as some simple shop tips, general happenings around the shop and overall general video blogging. To introduce the channel I am starting off with a Simple Spring time Project. This plant trolley can literally be built in minutes.. If you like the video be sure to subscribe to my ...
This week I decided to rebuild my tablesaws extension wing/router table. This time I removed the factory metal wing along with my old router table extension and built a new wing using the MDF and famica from last weeks build. This new extension wing combos as a router table as well as it has a pull out support arm that allows me to support my material as i cross cut long boards or sheets goods no matter if I am using a sled or not, because the support arm is adjustable. Here is a look at some...
After posting a few of these neat little calls I thought some other folks might like to know how to make them. They are an easy project and another way to use some of that scrap wood. The easiest way to make a scratch box is to have a dedicated mortiser set up with a 1/2”cutter but since I don’t have one here is how I do it. If you do have one you can quickly see how to use it to accomplish what I am doing. I start with a 1 & 5/8”“x4” piece 1/2” t...
- My Journey As A Creative Designer - Woodworking and Beyond - 1815 parts
- Extremely Average - 324 parts
- Toy costruction - 130 parts
- A journey into the workshop. - 115 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 91 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 82 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1840 entries
- dbhost - 448 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- mafe - 322 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- Dave Rutan - 266 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 253 entries
- Betsy - 228 entries
- A Slice of Wood Workshop - 222 entries
- stefang - 221 entries
- bandit571 - 214 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries