I have an end grain cutting board made of purple heart and yellow heart. The blocks are squares, 1-1/8” square, about 1-1/2” long/thick, glued up with mixed patterns (making letters). The board was treated with mineral oil. It appears that the yellow heart pieces have swollen from absorbing the mineral oil, and have busting some of the glue joints. Has anyone ever experienced this type of problem? Thanks for reading and your comments. Kevin
Pardon the sometimes slightly out of focus glimpse of these little, teeny tiny bowls coming to life. It probably has more to do with the coating of dust on my face shield than all them mega pixels crammed into my pocket. (Which out snaps my first TWO digital cameras.).. Anywho, our fellow lumberjock Karson sent me a lovely box-o-wood, and asked if I’d turn out a couple of cousins of this little beauty: We’d both figured these would come up as projects in my “next...
Well folks, it has been quite a while since I’ve been able to get on here and talk about the project. If you haven’t read any of the previous blogs, this is a wine rack that I built for my brother’s wedding. If you want the basic construction, see the prior posts. From here on is the little decoration details… I hope I don’t have too many pictures ;). I think I’ll let the pictures do some of the talking for me but I want to capture the whole process....
I had such a good time yesterday finishing up my latest project. Each step and addition I made to it made it look a little better. Building stuff like this is so much fun and I really get a lot of satisfaction out of making these little replicas. The hardest thing for me to do was to be patient and let the glue dry for each step. I knew if I didn’t wait, I would have a mess on my hands. I forced myself to walk away after each piece or set of pieces was glued and try to get busy on ...
I liked the first patchwork coffee table that I made so much that I’m making another one. With improvements of course. Start with a lot of different exotic woods. Thanks to www.exoticwoodsusa.com I started with 2” thick blocks of wood and resawed them to 1” (so I have enough left over to make another table). Make them look pretty (easy to do with this wood). This table was inspired in part by a carpet that I got in Afghanistan a few years ago… The ta...
I chose the types of wood I’m going to use to build the AmbersBear inlay I’m putting on the Festival of Trees wreath hanger. This slice of burled maple I found will make an awesome hanger and provide the perfect place to highlight an AmbersBear inlay. I’ve already built the Yellow Heart / Bacote and the glitter filled Purple Heart ornaments for the wreath so I laid them out with the hanger to see what it all looked like. Placing all the various colors together helps...
Started to build the RoseBud inlay that will go on the lid of the Bubinga and Purple Heart jewelry box. For this inlay I am using maple, yellow heart, rosewood, and kauri. Tomorrow I am going to do some sand shading to give the inlay a 3D effect. Should be pretty cool… P.S. The only down side to sand shading is the wood can sometimes stink and yellow heart is one of the worst!!! It is almost as bad as zebra wood… not quite but almost!!! Now that I’m finished with...
Yesterday was filled by doing lots of odds and ends. Among other things, I was trying to get some planning done for our upcoming trip to Chicago. I haven’t mentioned it much because things have been so up in the air about everything that it has seemed like things have changed every five minutes. It is a little unsettling to say the least. Add to that the issues with my car. It is nothing that I would consider to be “major”, but nonetheless it is a ten year old car with...
OK. Only two. But you are here reading so I got your attention. Today will I will show you the final photos of the scroll sawn version of my "Nevermore" plaque. I finished it up yesterday, and it is heading out to New Jersey this morning to be published in the November issue of Creative Woodworks and Crafts magazine, which will come out in September. That will give those of you who want to make it plenty of time. I am pleased with how it came out, but I still couldn&...
- My Journey As A Scroll Saw Pattern Designer - 1563 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1588 entries
- frank - 417 entries
- degoose - 395 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 276 entries
- William - 258 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- shipwright - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 189 entries
- Rustic - 188 entries
- Chris Davis - 183 entries
- BritBoxmaker - 181 entries
- Smitty_Cabinetshop - 175 entries