My Journey As A Creative Designer - Woodworking and Beyond #382: Meet Fiona - The Halloween Witch (Pretty Scary!)
I had such a good time yesterday finishing up my latest project. Each step and addition I made to it made it look a little better. Building stuff like this is so much fun and I really get a lot of satisfaction out of making these little replicas. The hardest thing for me to do was to be patient and let the glue dry for each step. I knew if I didn’t wait, I would have a mess on my hands. I forced myself to walk away after each piece or set of pieces was glued and try to get busy on ...
OK. Only two. But you are here reading so I got your attention. Today will I will show you the final photos of the scroll sawn version of my "Nevermore" plaque. I finished it up yesterday, and it is heading out to New Jersey this morning to be published in the November issue of Creative Woodworks and Crafts magazine, which will come out in September. That will give those of you who want to make it plenty of time. I am pleased with how it came out, but I still couldn&...
My Journey As A Creative Designer - Woodworking and Beyond #1370: Progress on the "Nevermore" Scroll Saw Project
I made good progress on my scrolled version of the "Nevermore" plaque although it did not come without its challenges. It was nothing that I couldn't overcome, but it took some real thought to sort some of the process out in my mind and make it work how I intended. But after spending the day laying things out and finally getting the chance to cut the pieces at the scroll saw, I am fairly happy with the results. Below is a photograph of where it sits as I write this morning: S...
I have an end grain cutting board made of purple heart and yellow heart. The blocks are squares, 1-1/8” square, about 1-1/2” long/thick, glued up with mixed patterns (making letters). The board was treated with mineral oil. It appears that the yellow heart pieces have swollen from absorbing the mineral oil, and have busting some of the glue joints. Has anyone ever experienced this type of problem? Thanks for reading and your comments. Kevin
My Journey As A Creative Designer - Woodworking and Beyond #1148: Different Finishes on My Key Ornaments
Yesterday was filled by doing lots of odds and ends. Among other things, I was trying to get some planning done for our upcoming trip to Chicago. I haven’t mentioned it much because things have been so up in the air about everything that it has seemed like things have changed every five minutes. It is a little unsettling to say the least. Add to that the issues with my car. It is nothing that I would consider to be “major”, but nonetheless it is a ten year old car with...
Well folks, it has been quite a while since I’ve been able to get on here and talk about the project. If you haven’t read any of the previous blogs, this is a wine rack that I built for my brother’s wedding. If you want the basic construction, see the prior posts. From here on is the little decoration details… I hope I don’t have too many pictures ;). I think I’ll let the pictures do some of the talking for me but I want to capture the whole process....
I liked the first patchwork coffee table that I made so much that I’m making another one. With improvements of course. Start with a lot of different exotic woods. Thanks to www.exoticwoodsusa.com I started with 2” thick blocks of wood and resawed them to 1” (so I have enough left over to make another table). Make them look pretty (easy to do with this wood). This table was inspired in part by a carpet that I got in Afghanistan a few years ago… The ta...
Pardon the sometimes slightly out of focus glimpse of these little, teeny tiny bowls coming to life. It probably has more to do with the coating of dust on my face shield than all them mega pixels crammed into my pocket. (Which out snaps my first TWO digital cameras.).. Anywho, our fellow lumberjock Karson sent me a lovely box-o-wood, and asked if I’d turn out a couple of cousins of this little beauty: We’d both figured these would come up as projects in my “next...
How this promise of a captain’s bed came about was almost an accident. My bride-to-be is used to having a large bed, California King, to be exact. All I had was a paltry queen-sized mattress on a relatively low frame. She commented that I probably stuck out over both ends when I slept (I’m 6’ 4”), and I had to agree with her. She also did not (understandably) want to share a bed with me that I had shared with my last (deceased) wife. So, I went and bought a Cal-Ki...
- My Journey As A Creative Designer - Woodworking and Beyond - 1815 parts
- Extremely Average - 324 parts
- Toy costruction - 130 parts
- A journey into the workshop. - 115 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 91 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 82 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1840 entries
- dbhost - 448 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- mafe - 322 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- Dave Rutan - 265 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 253 entries
- Betsy - 228 entries
- A Slice of Wood Workshop - 222 entries
- stefang - 221 entries
- bandit571 - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries