In the last episode the latest box (a Bubinga type thing) was in the final stages… After cleaning up the top’s edges, some “reveals” were found, small separations in the miters of the top… I tried what I’ve heard about here so many times, making a slurry of the sawdust and wood glue, and applying it to the separations… The results were excellent!! When the project is posted in a few days, You can be the judge of where the reveals were! :)Anyway, wh...
I built two mini cabinets (Spice Racks) that are beside the microwave and fill in the space between it and the two cabinets on each side. The original soffit was about 12” high like the builders put up. I tore them out and made them shorter so the cabinets could be taller. I did fine a couple of water pipes and a sink drain so I couldn’t make a totally flat ceiling but I ended up with a 4” soffit. Two 2X4’s and some drywall. I then decided to cover the front o...
Not much to say here. Got the knob installed, gave the table 2 coats of Watco Danish Oil (Cherry), and I think its pretty much all done. Might give it one more coat over the weekend.
Saturday late afternoon I got the chance to run out and glue up the top to the Shaker Table and let it sit overnight in the clamps. Sunday I got to spend most of the day in the shop and got the bottom and top rails installed, cut the top down to its final size, and began to sand the be-Jesus out of it. Got it down to 220 grit, installed the top (somewhere during the day I also installed the drawer stop in the back), and now, except for the drawer pull, construction is done. This projec...
Got to spend quite a bit of time the shop this weekend and made a bit a progress on both of the pending projects. The Woodworkers Fighting Cancer Table Build Over the weekend I managed to get the aprons for the table cut, and the tennons made. Following the advise of The Wood Whisperer I custome fit each tennon to its respective mortise. Did a dry assembly, and finally got the carcass of the table glued up (in two stages). I will have to do a little “evening” w...
Well it’s been 232 days since I last posted on my Kitchen remodel. It’s not that I haven’t done any work. It’s just that I haven’t posted. I’d built the base cabinets and installed them in earlier blogs and it was time to get the drawer fronts created. Let me say this, “My wife is a trooper, she is willing to live with the mess (begrudgingly), but she still puts food on the table and doesn’t make me take her out to eat until it’s fin...
Well I’ve still been busy building additional cabinets. I’m working on the lower cabinets, because the upper cabinets need to match placement of the lower cabinets and I’m now working myself into a corner. That’s the sink corner. Old picture. It’s just to the right of the range. So what I’ve accomplished is building the cabinets to the left of the range. The range is being moved about 18” to the left so the cabinets that I’m building...
I can’t believe how long it has been since I posted any work on this series. The Buffet/Hutch is not completed. It’s in the state that I showed last. The last post was 473 days ago. I just installed the first cabinets for the kitchen in Delaware. Old Picture. You can see my Greene and Greene Thorsten table that was entered in a LumberJock challenge. New picture. The counter top is from the old cabinet. i plan to put down Corian. I’m doing it myself so I’...
No it was not an offer of free wood. A posting on one of my blogs last night was a offer of most immense proportions. The offer was to allow me to use his shop and his time to work on a project for my wife. Here was his offer I immediately responded yes. The LumberJock was none other than our respected Lee Jesberger I mean here was a LumberJock that built 36 kitchens for one customer. Here was a LumberJock that built a $100,000 kitchen for another customer. He was allowing me to be h...
- My Journey As A Creative Designer - Woodworking and Beyond - 1736 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 98 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 78 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1761 entries
- frank - 417 entries
- dbhost - 410 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 303 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 239 entries
- Betsy - 228 entries
- robscastle - 215 entries
- stefang - 214 entries
- Stevinmarin - 212 entries
- Dave Rutan - 209 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- Rustic - 190 entries