LumberJocks

Woodworking blog entries tagged with 'wormy'

  • Advertise with us
View Canadian Woodworks's profile

Wormy soft maple rocker ( Hal Taylor version ) #10: Wormy soft maple rocking chair finished!

06-10-2010 11:04 PM by Canadian Woodworks | 7 comments »

This was my first rocking chair I made, I built it about 3 months ago, actually did a blog on here about the build but never actually posted up final pictures actually this is the blog…..lol I’ve since built 4 more chairs out of various woods, this one was built using wormy soft maple that my brother had cut about 10 years ago from the bush behind my house. I gave this chair to my grandparents, as I didn’t fell that I could sell my first one also the ” quality &#...

Read this entry »


View Canadian Woodworks's profile

Wormy soft maple rocker ( Hal Taylor version ) #9: Lot's of sanding, Glueing the headrest and mounting rockers / shaping rockers

03-10-2010 02:48 AM by Canadian Woodworks | 2 comments »

By the end of these pictures I’m siting in a rocking chair, that rocks and is about 95% complete! So I sanded to 320 grit everywhere that it would be hard to once the back supports were installed for good, as well as the supports them selves. Then glued the head rest using some clamps to keep it in line and using the screws as clamps, you remove 2 of the screws once dry. I then turned her over, the chairs that is and drilled my holes for the rockers and attached, proceeded to s...

Read this entry »


View Canadian Woodworks's profile

Wormy soft maple rocker ( Hal Taylor version ) #6: Stacks to rockes, extra width to back braces, jigs

03-03-2010 05:32 AM by Canadian Woodworks | 3 comments »

Empty clamp rack…... hmmm what could that mean, where did they go? Here they are, adding the ” stacks ” to my rockers, and adding a little thickness to the bottom of the back braces While i’m showing the rocker Jig, I might as well show the back brace jig, both are 8, 3/4’’ pieces of mdf, I think I went a little over killbut hey if i’m building chairs for the next 30 yrs it was worth it! Arms glued next step is shaping top...

Read this entry »


View Canadian Woodworks's profile

Wormy soft maple rocker ( Hal Taylor version ) #1: First progress report

02-22-2010 07:49 AM by Canadian Woodworks | 4 comments »

Okay I started this chair Jan 28th 2010 I wanted to get finish put on after 30 days…... simple goal eh? To my credit I got everything I could have done until I needed to use th 1/2’’ rabbit and 3/4 round over I did not have but ordered took 10 days to get here )-: So far total working days possible – 16 Progress This is a rocker design by Hal Taylor, I purchased his templates, PDF book, and video. I was at first a little on the fence as it started to a...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com