Happy Mothers’ Day everyone! Finally got a chance to go back to my parents’ house for the weekend (i.e., the location of my shop). Went into the shop and this is what my bench looked like: Looks like my dad has been at work in the 2.5 months I’ve been away. No surprises there. I made a pair of holdfasts in a blacksmithing class last fall. When I made them, I tried to round them down to about 3/4”. Since they aren’t necessarily a standard size sha...
I always feel like I just won the lottery when I acquire something for free. This is probably the nicest free thing I have ever snagged. It is made by ULINE and is a solid butcher block top with metal frame workbench. I really like the adjustable height. I am taller than most and develop back pain when working on normal counter height benches or surfaces. With the optional drawer these things retail for over $400 brand new! It is 60” long and 30” deep which is a great size for my ...
Well, here it goes. I posted in the forum about getting started on some hand tools and thought it was time to get started on the most important tool of the shop, the bench. There are a few design constraints on this project, namely, I have to be able to bring this thing back at least in pieces in my Toyota camry from Raleigh to Charlotte, but I’ve always enjoyed a challenge. Anyway, I’m going with the standard mortise and tenon design. I was sick of constantly looking at my cra...
I’ve been “done” with this project for nearly two weeks at this point, but I feel I should close this out. Along with the bench, I felt the need to showcase some of my favorite tools. I plan to update this blog with some of the uses for the gap that I can come up with…
Finally, all moved into my first house, and workshop! took forever to get the modem installed!!heres the before picture of my little workshop before we moved in and here’s after, well more during, i have a lot of plans for this little shop most of what you see is just temporary to be organized during a few renovations we have going on step 1 – clean upstep 2 – is going to happen at the end of this month, im replacing the 99$ ryobi saw with a Ridgid table to...
Ok, so it’s much more fun to dance than to fix…. Apparently welding a frame should not be undertaken without proper support, or ahh… more experience. The frame had a twist to it across the 59.5” length! I cleared a section of the shop floor (miracle) got out my door installation level and found a fairly level area. I then proceeded to use some shims to adjust the floor until the it was perfectly level. Gotta give credit to the guys that screeded the floor some 50 y...
The mobile workstation is in my opinion going to be the center of my workshop once its built. An integrated router table, table saw, downdraft table and ample storage in a ~ 5’ x 2’ area on wheels! Certainly not my idea, however, the layout will be done solely by me. I am open to all suggestions though, so please feel free to brainstorm here and let me know what has worked for you, what you would do differently if you had to build one again, etc. All comments and suggestions are w...
I wanted to do this for a long time and had the parts ordered and delivered a while ago, but one thing led to another and this was kept on the back burner and never saw the light of day. Ironically, it is now finished but still with no light of day as it is almost 11pm… All it gets is the light of the moon (which some may say is better). I really liked benchcrafted wagon vise (even a free plug for them) But for what it is I think it’s a bit overpriced (for a vise). Don’t ...
Hmmm… well I posted blog entry #6 this morning, and as of this moment it shows 158 views, but not a single comment! I’m either boring you all with too much detail and my mindless blathering, or I just have such a small following on this blog that all two of you were busy today…. Haha! Well I will continue at any rate, as I’m sure somebody who cares will run across this someday. ;) I decided after dry fitting the legs into their mortises to continue working on the...
On my walk this morning I paused to admire the Willamette River. It is wide and this morning it was quiet, peaceful and full. As always it was flowing past me, underneath my footbridge. The body split apart and came back together again with grace and ease. After admiring it’s awesome beauty I was reminded of my work and the feeling of running in place. On the surface the river looks so peaceful so laid back like nothing is really going on. It’s so full that rapids aren’t even showing whe...
- My Journey As A Scroll Saw Pattern Designer - 1660 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1685 entries
- frank - 417 entries
- dbhost - 400 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 281 entries
- William - 258 entries
- shipwright - 229 entries
- Betsy - 226 entries
- Stevinmarin - 212 entries
- stefang - 209 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 201 entries
- robscastle - 189 entries
- Rustic - 189 entries
- BritBoxmaker - 188 entries
- Chris Davis - 184 entries