Hello All, Take a look at how this is coming along. Should finish this weekend for sure! I designed and cut all of this project from pallet wood. I am very excited with what the outcome has been so far. Check out more projects and things built from pallets at: Pallet Craft!
See this post and more at Pallet Craft Hello Readers! You have probably seen lots of things made from pallets on the Internet, from chairs to storage and much more. However there is a key distinction between building projects from pallets and building projects with pallet wood. While both of these methods are recycling the pallet wood and putting them to good use (which I applaud), I want to show that the wood from these pallets can be turned into beautiful pieces instead of usin...
Also see this on Blogger at: http://blogspud.blogspot.com/2012/07/pulling-boards-from-pallet-without.html Hello all, I have been working with pallets lately and I thought to myself “what if folks want to do this too?” So I decided to share what I found to be the best way to remove a board from the pallet without destroying the pieces. Step 1: Cut the boards off of the top of the pallet.From the edges as close to the brace boards as possible, cut the top Boards (top bec...
Hello Readers! Well from the title of this entry, you can probably guess what this is about. Yes, Halloween has not even come yet; Yes, Thanksgiving is more than a month away! But I have learned that planning and starting now will give me the time I need to get the projects done. Why wait until the snow is falling and the bitter cold bites? So what will I be building? Well that is a secret and I will post all about them on December 26th and 27th. I don’t want any gift receivers to...
Also at: http://blogspud.blogspot.com/2012/07/pallet-board-corner-entertainment.html Hey Everybody! Okay, so after the completion of my last project with pallet wood, I have turned my attention to an issue, my current embarrassment of an entertainment center. To be fair to myself, this was one of my first projects, it had doors, had a coat hanger pole, and was actually a dresser. But since we have moved, it is causing a bit of a clutter and is incredibly imposing. So what bett...
Hello All, This is not a new tip, but I thought I’d mention it in my blog anyways. As always see my blog at: http://blogspud.blogspot.com/ Ok so working with pallets is not always perfect, the wood is definately not top grade by any means and I will not pretend it is. So occasionally you are going to want to use a wood filler at some point. Now Elmer’s, as well as Varathane and Rustoleum sell wood filler that is pretty good, but the cost can add up significantly and this is ...
Hello Readers! Just a quick update: I got plans for the maloof chair, so I will be studying these extensively for my build. My wife has been perusing pinterest and the internet and has stumpled upon a few DIY pallet creations that she loves and wants me to recreate. Well its safe to say I am at no shortage of projects now… Here are a few of the projects she has in mind (more at my blog, I could not fit them all in this post): Now you might have noticed if you read m...
More photos available on my blog: Pallet Craft! Hello Readers! This past weekend, a major trend took place, it rained constantly and unrelentlessly. That being said, I was able to utilize my carport this weekend to get things moving on the pallet entertainment center, and the recycled lumber crib mobile. So lets dive right into the action! Pallet Entertainment center! This is probably the most exciting project for me since the pallet wood table that many of my readers saw in my fi...
Hello All, As always check out this, and other projects at my blog: http://blogspud.blogspot.com/ I am finishing up a project I started on the side with my adult patio table set and I wanted to blog about it in my series while I wait for my wednesday pallet pickup for my next project as seen in my blog. This table is designed for my daughter to have and will have pretty much the same look as the full size set that I built. I plan to make like benches and stain the wood the same as we...
This is an entry from my blog: Pallet Craft! Hello Readers! I have been writing to this blog for the past few weeks to share my endeavors with pallet woodworking, and over that time I have seen my blog grow exponentially. This is definitely an exciting time for me as I get to share all of these experiences with more and more of you, however, it has been received with some mixed reviews as well. I have had several readers express that they are wary of pallets and their use in woodwork...
- My Journey As A Scroll Saw Pattern Designer - 1584 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1609 entries
- frank - 417 entries
- degoose - 396 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 278 entries
- William - 258 entries
- Betsy - 221 entries
- shipwright - 213 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 185 entries
- Chris Davis - 183 entries
- Smitty_Cabinetshop - 176 entries