This week I embarked on my latest creation adventure which I made out of pallet wood boards… a patio table with benches! I wanted this to look prestine and clean while maintaining a sort of rustic feel that the pallet wood gives to it. So I went through my stock of pallet boards and pulled the best quality / matching sized boards I could find and used them in the project. The only things I bought for this project were the screws (I normally use the pallet nails for the ultimate recyc...
Hello All, This is not a new tip, but I thought I’d mention it in my blog anyways. As always see my blog at: http://blogspud.blogspot.com/ Ok so working with pallets is not always perfect, the wood is definately not top grade by any means and I will not pretend it is. So occasionally you are going to want to use a wood filler at some point. Now Elmer’s, as well as Varathane and Rustoleum sell wood filler that is pretty good, but the cost can add up significantly and this is ...
Hello Readers! I am happy to say I have finally laid the groundwork in my woodworking career. I am very happy to have found this hobby, I enjoy it, and I am learning new things everyday. I can see myself in 5 to 10 years building beautiful pieces of art from wood, and past that? Who knows! But I am sure it will be fun! For now I plan to stick with Pallet Crafting, it seems to be a great medium for learning. In the future I would like to work with fine woods, but small steps and a eagerness...
Also see this on Blogger at: http://blogspud.blogspot.com/2012/07/pulling-boards-from-pallet-without.html Hello all, I have been working with pallets lately and I thought to myself “what if folks want to do this too?” So I decided to share what I found to be the best way to remove a board from the pallet without destroying the pieces. Step 1: Cut the boards off of the top of the pallet.From the edges as close to the brace boards as possible, cut the top Boards (top bec...
This is an entry from my blog: Pallet Craft! Hello Readers! I have been writing to this blog for the past few weeks to share my endeavors with pallet woodworking, and over that time I have seen my blog grow exponentially. This is definitely an exciting time for me as I get to share all of these experiences with more and more of you, however, it has been received with some mixed reviews as well. I have had several readers express that they are wary of pallets and their use in woodwork...
See this post and more at Pallet Craft Hello Readers! You have probably seen lots of things made from pallets on the Internet, from chairs to storage and much more. However there is a key distinction between building projects from pallets and building projects with pallet wood. While both of these methods are recycling the pallet wood and putting them to good use (which I applaud), I want to show that the wood from these pallets can be turned into beautiful pieces instead of usin...
For all the images on this entry and others please go to my blog: pallet craft! Hello All, This is part of my series Pallet Craft on my blog. It is pooring out once again, and because I have nowhere else to work on my projects except for my mobile work station (outdoors), I decided to blog about why I do what I do. Woodworking in general came to me as something foriegn that I had never really given a lot of thought of doing (I mean common, I was a tech student), I thought of it as so...
Hello Readers! Well from the title of this entry, you can probably guess what this is about. Yes, Halloween has not even come yet; Yes, Thanksgiving is more than a month away! But I have learned that planning and starting now will give me the time I need to get the projects done. Why wait until the snow is falling and the bitter cold bites? So what will I be building? Well that is a secret and I will post all about them on December 26th and 27th. I don’t want any gift receivers to...
Hello All, Take a look at how this is coming along. Should finish this weekend for sure! I designed and cut all of this project from pallet wood. I am very excited with what the outcome has been so far. Check out more projects and things built from pallets at: Pallet Craft!
Hello Readers! Just a quick update: I got plans for the maloof chair, so I will be studying these extensively for my build. My wife has been perusing pinterest and the internet and has stumpled upon a few DIY pallet creations that she loves and wants me to recreate. Well its safe to say I am at no shortage of projects now… Here are a few of the projects she has in mind (more at my blog, I could not fit them all in this post): Now you might have noticed if you read m...
- My Journey As A Scroll Saw Pattern Designer - 1542 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 94 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1567 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 269 entries
- William - 258 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- shipwright - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 188 entries
- Rustic - 186 entries
- Chris Davis - 183 entries
- BritBoxmaker - 181 entries
- Smitty_Cabinetshop - 170 entries