LumberJocks

Woodworking blog entries tagged with 'woodburning'

  • Advertise with us
View Julian's profile

Beaded vessel #6: Decorating the top half

04-09-2017 12:54 AM by Julian | 1 comment »

Spent some time finishing the pattern on the top half. With the exception of the rim. Haven’t decided on what to do with that part. Colors: Lapis (blue), cardinal (red), & dark brown.

Read this entry »


View Julian's profile

Beaded vessel #5: Coloring with ink pens

04-07-2017 02:41 AM by Julian | 2 comments »

Finally finished burning all the lines so now it is time to start coloring in the design. I changed the design from what I previously posted. Here is a photo of the design I chose and my progress. For this design I am using dark brown, a deep red, and blue.

Read this entry »


View Julian's profile

Beaded vessel #4: Burning 99.5% complete

04-05-2017 02:53 AM by Julian | 1 comment »

I still have two rings at the center to complete and the top rim. This has taken me over a week to get to this point.

Read this entry »


View PhilBello's profile

Life as an Amateur Woodworker #82: It's been a while!

12-27-2016 01:06 PM by PhilBello | 3 comments »

I hope everyone had a Festive Christmas, and I wish everyone a very Happy and Prosperous New Year! I didn’t realise quite how long I had been out of the game, until today. I seem to have spent all my time with Medical Specialists. I have had the operation on my right knee, and that is progressing nicely, at least I am no longer walking with a stick. Unfortunately the second spinal block, did not work on my back, so what happens next, I have no idea, and I am also waiting to see if th...

Read this entry »


View Fatherlewis's profile

Cheap wood 101

10-10-2016 02:27 PM by Fatherlewis | 5 comments »

Hi fellow LJs. I must say that in my first couple of months here, I have learned a lot. This place is a wealth of knowledge and good ideas, and maybe some not too good ideas. But hey, we are all adults here, and we share our triumphs and defeats, good ideas and bad(if there really is such a thing), as well as good deals, trade secrets, and all other things woodworking. So I found a steal of a deal on the hardwood rough sawn lumber over the weekend. My excitement poured over on the insid...

Read this entry »


View Jace McDaniel's profile

Small workshop struggles with clutter; taking shortcuts

08-24-2016 04:21 AM by Jace McDaniel | 1 comment »

The past couple years ive developed a passion for woodworking. its my time where i can get so focused on my projects and completely block out anything the world is throwing at me at any given time. I guess you can say the craft itself is basically my therapist, only if i were to substitute a real therapist id probably save about 10x the money that i do on tools, but they are beginning to get to the point where they are starting to pay themselves off. In my opinion where the true passion for ...

Read this entry »


View MikesProjects's profile

New Vintage 20" BandSaw Project, Rust Removal & Biesemeyer Fence Install #2: Restore & Install biesemeyer fence on the BandSaw

06-28-2016 04:48 AM by MikesProjects | 2 comments »

Be sure to check out the first part of this series where I get the saw & refurbish it… The old biesemeyer fence I am using was originally off a powermatic table saw. The shop I got it from had it set up on a saw that was used strictly for running dados. For that they cut the rails short & it only had a 18” rip capacity which worked out great for this bandsaw because I would have felt bad having to cut the rails down my self. I always feel bad modifying old vintage stuff, I...

Read this entry »


View MikesProjects's profile

New Vintage 20" BandSaw Project, Rust Removal & Biesemeyer Fence Install #1: rust removal on cast iron top & refurbish action multiple videos

06-28-2016 04:03 AM by MikesProjects | 8 comments »

Video links below… Recently I purchased an older 20” bandsaw. I need a larger bandsaw that can handle anything I throw at it.. I think I found that in a mid 70’s Rockwell 20” wood cutting bandsaw. It probably came out of a school wood shop. The motor is 2hp, it has two speeds which can be adjusted with the belt, it has already been upgraded with carter guides, this big boy saw weighs over 600 lbs. I made several videos regarding this saw which i’ll post below. ...

Read this entry »


View dbray45's profile

Knives, making scales, different rivets, handles

05-25-2016 12:33 PM by dbray45 | 17 comments »

One of the things missing on this site is making knife scales. This is not something I normally do but I bought my wife some knives that required scales and during the process, noticed that we had several knives where the handles looked like crap, were cracked, and even broken. Some of them had really good blades and some were junk (these were tossed). During this process, the knives that I bought from Woodcraft have really nice blades but the rivets were less than desirable, sam...

Read this entry »


View wdwrkr631's profile

Garrett Hack Inspired Table Build #3: Garrett Hack Inspired Table Build #3

02-08-2016 11:51 PM by wdwrkr631 | 4 comments »

Hello Everybody,Here is part 3 to my Garrett Hack inspired table build. Here is a link to the video. https://www.youtube.com/watch?v=To9wK5_FAiA

Read this entry »


« prev 1 2 3 4 5 ... 15 next »
142 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com