LumberJocks

Woodworking blog entries tagged with 'woodburning'

  • Advertise with us
View MikesProjects's profile

New Vintage 20" BandSaw Project, Rust Removal & Biesemeyer Fence Install #2: Restore & Install biesemeyer fence on the BandSaw

06-28-2016 04:48 AM by MikesProjects | 2 comments »

Be sure to check out the first part of this series where I get the saw & refurbish it… The old biesemeyer fence I am using was originally off a powermatic table saw. The shop I got it from had it set up on a saw that was used strictly for running dados. For that they cut the rails short & it only had a 18” rip capacity which worked out great for this bandsaw because I would have felt bad having to cut the rails down my self. I always feel bad modifying old vintage stuff, I...

Read this entry »


View MikesProjects's profile

New Vintage 20" BandSaw Project, Rust Removal & Biesemeyer Fence Install #1: rust removal on cast iron top & refurbish action multiple videos

06-28-2016 04:03 AM by MikesProjects | 8 comments »

Video links below… Recently I purchased an older 20” bandsaw. I need a larger bandsaw that can handle anything I throw at it.. I think I found that in a mid 70’s Rockwell 20” wood cutting bandsaw. It probably came out of a school wood shop. The motor is 2hp, it has two speeds which can be adjusted with the belt, it has already been upgraded with carter guides, this big boy saw weighs over 600 lbs. I made several videos regarding this saw which i’ll post below. ...

Read this entry »


View dbray45's profile

Knives, making scales, different rivets, handles

05-25-2016 12:33 PM by dbray45 | 17 comments »

One of the things missing on this site is making knife scales. This is not something I normally do but I bought my wife some knives that required scales and during the process, noticed that we had several knives where the handles looked like crap, were cracked, and even broken. Some of them had really good blades and some were junk (these were tossed). During this process, the knives that I bought from Woodcraft have really nice blades but the rivets were less than desirable, sam...

Read this entry »


View wdwrkr631's profile

Garrett Hack Inspired Table Build #3: Garrett Hack Inspired Table Build #3

02-08-2016 11:51 PM by wdwrkr631 | 3 comments »

Hello Everybody,Here is part 3 to my Garrett Hack inspired table build. Here is a link to the video. https://www.youtube.com/watch?v=To9wK5_FAiA

Read this entry »


View Bob Rodrigues's profile

Dust Collection??

02-02-2016 01:14 PM by Bob Rodrigues | 10 comments »

I’m in the market now for a dust collector. Being married with 2 kids there really isn’t a lot of money I can budget for this at this time. I’ve read the reviews on the Harbor Freight dust collector but I’m wondering If I could get some woodworkers perspective that have this unit. How is it? Does it work well? And is it ok to run pvc or gutter sewerage pipe instead of the metal stove type of piping???? Any info on this topic from all LJ’s would be great.

Read this entry »


View Bob Rodrigues's profile

Table saw blade hard to go down????

01-27-2016 02:30 PM by Bob Rodrigues | 4 comments »

I have a General 50-200r model table saw. Lowering the blade is a chore becuase it feels like its binding. I’ve squirt some liquid wrench & WD40 on the worm drive screws & worked it up & down. It’s gotten better but there is still an issue. Wondering if anyone else is having this issue & what’s a good lubricant to use on these gears as well? Also what would be a good cleaner to clean the gears with as well? Thanks all.

Read this entry »


View revieck's profile

Scrapwood key and mail holder.

01-09-2016 12:04 AM by revieck | 1 comment »

https://youtu.be/J5ZFaT5BOHc In this video, I make a key holder with scrap poplar.

Read this entry »


View wdwrkr631's profile

Weekly Shop Update #6: Shop Update Week Of 9 August 2015

08-10-2015 11:51 PM by wdwrkr631 | 1 comment »

Hello everyone, Check out this weeks shop update to see whats been happening in our shop. We discuss the tool cabinet and future project ideas. Here is a link to the video. https://www.youtube.com/watch?v=UdkqV23PG6w

Read this entry »


View Maxpowers's profile

realization

05-27-2015 05:27 AM by Maxpowers | 3 comments »

So I was sitting one day trying to figure out what to do with a big chunk of cherry that a friend had given me.see the thing is that it wasn’t dried properly so it cracked like a toronto city road and had knots all thru it…. I didn’t have the heart to tell my friend it was useless. Plus I was stubborn and determined to find a way to make something nice out of it.I cut a couple useful chunks off to use as accent pieces in the future, but mostly it just keep getting put under...

Read this entry »


View droogs's profile

The Tinker's Apprentice #2: My Dilemma

04-07-2015 08:50 PM by droogs | 1 comment »

Having had my “road to Damascus” moment, the realisation dawned on me that although I had just had a world beating business idea; I in fact had absolutely no way in which to achieve its fruition. After all, here was I with no tools at all, other than a very worn Phillips screwdriver, a decrepit claw hammer, a knock-off 12mm Marples “blue” bevelled chisel (with sides that could only be described as having been ground using the kerb) and a rather cheap and nasty ¼” drive socket set missing the ...

Read this entry »


1 2 3 4 ... 13 next »
126 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com