Aimed at those new to saw sharpening, this instructional video is 2 1/4 hours long and covers the theory, the tools and the practice of sharpening western saws. You get to look over my shoulder as I sharpen four saws – two backsaws and two hand saws. I’ll explain the saw sharpening process and how you apply it to different scenarios. I really hope you find it useful. As to the production quality, I’ve done the best I could. I had to record it outside, so there is a bi...
Hello. Here’s my disclaimer! Let me start by saying: wear respirator protection throughout this whole process! This is dangerous dusty work, and I claim no responsibly for what you do with this information. This is just an account of what I do. It took me awhile to figure out the inlay piece, and I’m more than willing to share what I’ve learned. Ive attached rock crushers and a pic of resin and rock on a scrap to my projects section- im just not up to speed on this HTM...
Most all of my projects Have my brand on it in one place or another. Now, I don’t have a branding iron. But what I do have is a way of Chemically etching Brass plates with my logo on it. Here Is an example of one Now using the method I am going to show you, you can easily create custom plates as well for your projects. Not just logos but even plaques and signs.. Here are a few examples Here is how you can make an etched brass plate of your own….Now the first 2 vi...
I routed in grooves on the fence of my new resawing jig for screwing logs to it, and with that, it was ready for action: Here’s a video – shot on yesterday’s lunch break, edited together last night, with the jig I made on Sunday – of my very first resawing work. The Timberwolf blade works very well, with no resistance and a clean cut. The Craftsman 18” wood/metal bandsaw is a slightly different story. It’s wobbly, which is just a ‘feature...
I got 2 1” Timberwolf blades from Suffolk Machinery Corp. – 2TPI and 3TI – several months ago, and have been dying to try them out ever since. In that time I had several more projects, mom’s 10-day long yearly visit, my best friends’ wedding, a project I built for that (that I should post one of these days), and so much else. I didn’t want to use them until I had a resawing jig ready to go, so realizing that time was now, I jumped on it yesterday, later in ...
So here we go again. It looks like you folks are having fun making some wooden planes so lets add to the fun. Here is a great little coffin shaped smoother for your collection. This is a fantastic size and a great introduction to making a wooden bench plane. The construction of the parts is a very typical arrangement and the size of wood needed to make this is much easier to find. Here are the plans in several different layouts. The download has four pages. First one is for shop reference ...
I thought “What if I coated the whole ring in cyanoacrylate finish?” ...and I tried it. The rings have since been through regular everyday wear including dishwashings, handwashings and showers. END RESULT: This finish is holding up better than both Waterlox and Arm-R-Seal. And, in my opinion, it actually looks better. CAVEATS: Obviously, this would be difficult to do on anything but very small woodworking projects. It’s just right for these wooden rings, but ...
Some things that I've learned about finishing. Some of them I also use. #2: Home made wood fillers, Pumice and Rottenstone.
Pumice and Rottenstone as wood filler. When you go through the catalogs and look at all of the finished that are available, you will not see this tip. They sell you Pumice and Rottenstone to be used as a buffing and polishing agent to bring up a gloss on the surface, but no one tells you about using it as wood filler. The interesting thing about Pumice is it is basically transparent so if you use it as wood filler it doesn’t contribute any different colors to the wood that it’s being us...
It seems like everyone these days are making videos of things, so I decided to do one as well. It is very simple, but it is my first one. I have included the degrees you cut the base at (which seems to be a common question). Enjoy it!
Well I haven’t had a chance to post a project video for sometime because things got busy around the shop. Now with things leveling out, I had a chance to shoot a video showing how to build a simple Folding Stool. This folding stool stands 24” tall with a round top. It is completely collapsible so you can store it easily or take it on the go.. I hope you Guys enjoy this 2 part project build Be sure to check out my website by clicking here A Simple Design of Ocala
- My Journey As A Scroll Saw Pattern Designer - 1695 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 92 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Life as an Amateur Woodworker - 69 parts
- Sheila Landry (scrollgirl) - 1720 entries
- frank - 417 entries
- dbhost - 403 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 287 entries
- William - 258 entries
- shipwright - 232 entries
- Betsy - 228 entries
- Stevinmarin - 212 entries
- stefang - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 204 entries
- robscastle - 196 entries
- Smitty_Cabinetshop - 191 entries
- Dave Rutan - 191 entries
- Rustic - 190 entries