So as I mentioned in my earlier blogs for this year’s ShopQuest I wanted to get rid of my wood rack. I decided that was going to take a major effort and instead to do a little better allocation of space on it and see how it works this year. I spent a weekend cleaning it up and finding space for some of the wood and getting rid of some of it as well. I am not a fan of throwing out wood but some of it just was not going to be useful at all. I narrowed it down a little further and used pie...
Well due to the fact that I somehow managed to pull my back out at work last week I did not get a lot done in the shop. Could barely make it down the steps most of the week. It is feeling better now and I decided to use some spare time to finish the rearranging in the shop. I managed to get some excess wood thrown out during the last two trash days and found a place for most of the rest of the wood that I had piled up in the alcove. Found my old scrap bin I had built a few years ago at...
I’m installing a wood rack I built and would appreciate any input as to mounting. This is going in a dingy basement. In fact, it is going in the only room remaining that still has a dirt floor. The rack has been built and consists of 4 vertical supports as follows: The room where it is going looks something like this: The rack will be mounted on the right-hand wall like this: The vertical pieces will be supported by a simple 2×4 lying flat on the floor. Vertica...
I’ve seen several variations of these rolling wood storage units. Inspired by them, I came up with this one for a friend of mine: It incorporates storage for long lumber, sheet goods, and small turning blocks as well. About the only thing I might add would be dowel storage of some kind. Truth be told, I’d probably just put them in tubes and store them on one of the shelves. It is a typical A-Frame design with half lapped joints. For economy, most of the stick material is...
Latest design for South wall This is my design for a cabinet to hold all of my bolts, screws, and nails. Progress Pic of it. Bolt bins are in place. This is my design for a cabinet to hold all of my wood finishes and glues and my wifes paint. (unsupported end screwed to studs) Progress pics, sorry for all the junk in the way. I had to throw everything out of the middle of the floor in order to fit the triler in overnight. Workbench is in the background (not for fine wo...
- My Journey As A Creative Designer - Woodworking and Beyond - 1792 parts
- Extremely Average - 324 parts
- Toy costruction - 115 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 81 parts
- Woodworking on a Half-Shoestring - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1817 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 241 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 210 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries