I have been corresponding with Chris (Crushgroovin) about this lathe and have noticed a few posts from people who were curious or had experiences with it, so I thought it might be deserving of a blog entry. For clarification, this is not the more solid cast iron 34706 model that gets more solid reviews since it is, in truth, a much more solid lathe. This is the lathe as listed in the HF online catalog - While I would not be one to recommend this one for purchase, especially since yo...
IntroductionI’ve been turning large chunks of un-seasoned firewood since I started turning bowls over a year and a half ago. Much of the wood is turned without regard to it’s moisture content…I don’t have time to wait thru the recommended aging periods and I don’t choose to rough turn bowls and set them aside for a few months before turning them a second time. This isn’t about attitude, it’s about loving the experience of turning and accepting the cha...
The lathe was powered by an old 1 HP Craftsman motor run through a jackshaft and a 4 step pulley, thespeed was somewhat variable. I had read about people adapting treadmill motors to lathes and decidedto attempt it. The first free treadmill was not operating because the controller was bad, but had a $300-according to the owner- motor, the second had no controller and the third had a controller I could not adapt. I bought a rebuilt MC-60 controller for $50.00 and my core and started down th...
So I went down to Springfield MO on Feb 14th to the Grizzly Showroom. Managed not to spend all of my money but sure put a dent in the bank account, but I think it worth it.The man reason for heading there was to pick up m new lathe, I didn’t want to wait for the new G0766 since it has now been pushed out to May 26th. So I purchased the G0733. I gotta say I’m impressed with it overall so far but haven’t done a lot with it yet. Give me a couple weeks and I will post a review o...
Mom visited last week, and with some ideas of things she wanted me to build, we checked out Anderson Plywood (LA, CA) – she loves zebrawood :) – and my favorite place: Rockler (Torrance, CA). While at Rockler, she fell in love with some turned bottle stoppers made by Robert, who I think might be a manager there, and decided she wanted me to make a bunch for her and her friends, starting with a set of 3 for one friend in particular. They only had 2 chrome wine bottle stopper har...
Today I will show the growth stage of the basic headstock, It will bloom in a later post with pulleys and indexing plate. I obtained a piece of hollow seamless heavy wall pipe in a short ends bin, would have liked a different size with a smaller hole but beggars can’t be choosers. 20$ I could afford, to cut a better piece it would have been about 60$. I wanted a hollow shaft so I would have the opportunity to use a vacuum chuck, homemade of course. First step was to lathe a threaded in...
How often have you dined at a restaurant and the waiter or waitress asked you “Would you would like some cracked peppers with your meal?” Probably more than once, right? If you’re like me I answer “Sure. I’d love some.” There’s just something nice about having a good meal with freshly ground salt and pepper. For a long time I have browsed through my various woodworking catalogs and noticed mechanisms for salt and peppermills. Then one day I decided to order the mechanisms and make a se...
I would like to share with how I grew my 1000 lb. SCRAP IRON WOOD LATHE. http://lumberjocks.com/projects/242698 I like to grow things BIG. Its a passion So what does it take to grow something, well first you need some viable seed You can just find it laying around. so this is what \i started with. Section of a Logging truck reach, pipe from a sawmill burner, piece a sawmill carraige, a piece of heavy angle iron, end of a camper trailer frame. Then add a key ingred...
I was needing to make a vacuum chuck for my lathe and didn’t want to use a faceplate or fool with using a nut fastened to the chuck. The quick n dirty is that I used delrin I had laying around, a 4” PVC union, and some weather stripping to make my vacuum chuck. The majority of the process was completed using my wood lathe. For the detailed how to check out my post How to Make a Vacuum Chuck!
The first time I attached the motor, a 1 hp industrial dust proof motor that I bought for 20$ and then Replace a 20$ bearing, would have liked more but thought this one was a good deal, I made steel blocks and hinged it on that. I rattled and made too much noise so had to come up with another plan and mount it on rubber bushings. What I came up with is rubber bushings in the end of a scrap shock absorber. Then weld it to a steel plate using a dowel to line up the bushings, made tabs to...
- My Journey As A Creative Designer - Woodworking and Beyond - 1828 parts
- Extremely Average - 324 parts
- Toy costruction - 131 parts
- A journey into the workshop. - 115 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 91 parts
- Daily Update - 87 parts
- Shop stuff - 85 parts
- Life as an Amateur Woodworker - 82 parts
- Sheila Landry (scrollgirl) - 1853 entries
- dbhost - 452 entries
- frank - 417 entries
- degoose - 398 entries
- Ecocandle - 325 entries
- mafe - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- Dave Rutan - 275 entries
- robscastle - 263 entries
- William - 258 entries
- shipwright - 258 entries
- A Slice of Wood Workshop - 233 entries
- bandit571 - 229 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries