778 days ago
by degoose |
13 comments »
This is just a quick post to give some information regarding the way I make the wine bottle balancer…You can use other dimensions and it will still work
I did research the whole thing and found different angles and other variables…but this is what I have come up with by trial and error… to make the bottle balance in a horizontal position.. not pointing up or down… more aesthetically pleasing.. and if it looks right don’t mess with it…
Length…11 ...
Read this entry »
778 days ago
by degoose |
15 comments »
To make a wine bottle balancer it requires a hole drilled at an angle…so what to do… build a jig for the drill press..
Cut some tapered pieces and make a ramp to hold the blank to be drilled…
Hey… what is this? I have a Torque WorkCentre….. and one of the features is the ability to drill holes at any angle… hmmm….. make a jig to hold the blank horizontally on the bed and then drill at the required angle…
Two t-bolts and some knobs to ...
Read this entry »
1070 days ago
by Jonathan |
13 comments »
My wife will be traveling out to San Diego in the middle of November to participate in the Susan G. Komen 3-Day for the Cure walk.
In order to be an entrant, she has to raise several thousand dollars through donations. One of her coworkers is planning a fundraising event to be held at a local restaurant sometime next month. There will be an auction at the event, with all the proceeds going directly to the walkathon.
I would like to build a few things that can be auctioned-off to help ra...
Read this entry »
