My daughters wanted the barn to be “hobbit-style,” complete with a round door. So, for the wall on the “human side” that will be visible from most of the property, I wanted to find a round window to match. Again through a free find on Craigslist from a floor and door company, I managed to acquire 2 beveled half-round and two rectangular door lites, double -paned: For the “goat-side” window, I was also able to get 6 15” double-paned squares from...
We have a rural church built in 1920 and abandoned in 1970. By last year it was near collapsing with serious damage to the roof and one wall. All windows and doors had been removed. A few of us volunteered to save it so we got the required approvals to go on site and do our thing. My task is to build the windows, doors and related jambs. The windows are the gothic arc style. All I have to work from is one photo of what they were back in 1970 and a severely weathered window jamb with sil...
Also, video blog is here: http://www.youtube.com/watch?v=vEzqKl-QOwA&feature=youtu.be I was looking for some photos and saw this – very old, and remembered that long time ago saw rare architecture, sculptures and houses in Riga. I always liked how the tree with impression of the ages looks. It reminded me my childhood, when my grandfather was making different things in «old style». The more things changed, the more they stay the same – and in this time «old style» ...
I posted a picture of a Craftsman Style Frame i made and i thought if anyone was interested, i have a two part video series of how i did it. The main jointery is the use of a half lap. It’s a simple and yet strong joint. I decided to show how to make it using both power tools and hand tools. Hope you enjoy it.chad stanton
Hello everyone, a short time ago I posted a project titled Cedar Window Box. In that project post I mentioned that I would check with the client for their approval on posting the dimensioned SketchUp graphics I created. Well, they approved. I put together a brief, and I mean brief, video that includes the dimensions for all of the major components of the window box. I had to do it this way because the graphics were too large to post on the project page. The clarity is not as good as I had ...
We finally got some decent weather, so I rushed out, put some shingles around the window. I couldn’t salvage enough old shingles for the job, but it didn’t turn out too bad. The new ones will gradually blend in while aging. Photos by Barb!
I originally wanted raised panel arches for over the windows in the kitchen similar to some I had seen at Menards. That was three years ago. I drew them up full scale and gave them to the cabinetmaker who did our kitchen. He never got to them so I decided I would make them. I had done all the trim work in the kitchen, fluted some pieces, and added corner blocks with rosettes to trim between cabinets in the dining room. After thinking on the arch design for a period of time, I decided t...
- My Journey As A Scroll Saw Pattern Designer - 1692 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 91 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Life as an Amateur Woodworker - 69 parts
- Sheila Landry (scrollgirl) - 1717 entries
- frank - 417 entries
- dbhost - 402 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 286 entries
- William - 258 entries
- shipwright - 231 entries
- Betsy - 228 entries
- Stevinmarin - 212 entries
- stefang - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 203 entries
- robscastle - 196 entries
- Smitty_Cabinetshop - 190 entries
- Rustic - 190 entries
- Dave Rutan - 189 entries