LumberJocks

Woodworking blog entries tagged with 'willow'

  • Advertise with us
View OregonBurls's profile

How to Cut Burls with Pin Up Video

10-23-2009 11:59 PM by OregonBurls | 21 comments »

Hey everyone, I was asked by a few of you from my blog “How to find legal burls” “once I get them how do I cut the burls”? Well I just made a short vidio on how I cut to the burl in the context of a bowl or hollow form blank. Please coment and add if I don’t cover it well. If you not want to go thru the hassle of finding and cutting your own you can alway buy from me. LOLThanksGreg Thanks Todd on the tip for getting the video on this post.

Read this entry »


View WoodJediNTraining's profile

Building a Tablesaw Base Part 2

04-22-2013 12:12 AM by WoodJediNTraining | 4 comments »

Well I finally finished the Tablesaw Base, trying to film during rain storms is almost impossible with the ambient noise from the rain hitting the metal roof.. but I waited it out, and am very happy with the outcome.. Here is a look at the final steps of building this base

Read this entry »


View OregonBurls's profile

Finding & Discovering Nice figure In the Crotch Of A Tree

05-04-2010 06:32 AM by OregonBurls | 23 comments »

Hey everyone! I just finished this Video to teach the basics of discovering good figured wood.Hope you like it and would love your feed back and additions. ThanksGregOregonburls

Read this entry »


View WoodJediNTraining's profile

Simple Spring time project - Plant Trolley

03-03-2013 04:21 AM by WoodJediNTraining | 4 comments »

Hey everyone, I am introducing my new Youtube channel called the A.S.D. Rundown! This channel is in association with my main main channel, but will be specific to doing project follow ups,simple shop projects as well as some simple shop tips, general happenings around the shop and overall general video blogging. To introduce the channel I am starting off with a Simple Spring time Project. This plant trolley can literally be built in minutes.. If you like the video be sure to subscribe to my ...

Read this entry »


View WoodJediNTraining's profile

Build a Steam Box

07-27-2013 11:41 PM by WoodJediNTraining | 8 comments »

Recently I purchased a Steam Bending Kit from Rockler Woodworking and Hardware so I could try out some Steam Bending. Bending wood is something I have never tried before and is out of my comfort zone. I wanted to dive into this area of woodworking and challenge myself as well as learn something new. So of the various forms of wood bending (Laminated Bending, Milled Bending, Steam Bending) I chose steam bending to be my first attempt. The kit I purchased included the reservoir, hose, and so...

Read this entry »


View WoodJediNTraining's profile

Accessory Wing For The Tablesaw

03-01-2013 02:57 AM by WoodJediNTraining | 12 comments »

This week I decided to rebuild my tablesaws extension wing/router table. This time I removed the factory metal wing along with my old router table extension and built a new wing using the MDF and famica from last weeks build. This new extension wing combos as a router table as well as it has a pull out support arm that allows me to support my material as i cross cut long boards or sheets goods no matter if I am using a sled or not, because the support arm is adjustable. Here is a look at some...

Read this entry »


View OregonBurls's profile

The Burl Hunter #9: Filthy Riches

04-04-2014 07:43 PM by OregonBurls | 7 comments »

Hey everyone! the name of the show is called Filthy Riches and we premier April 20th!here is the link so you can see the trailer: Filthy Riches

Read this entry »


View WoodJediNTraining's profile

Woodworking Contest - Whirligig Wars Winners

07-26-2012 08:41 PM by WoodJediNTraining | 8 comments »

All in all it was a great event with a lot of great entries. I would like to thank all those who participated in the 1st Annual Whirligig Wars Contest. When I presented the idea of holding a whirligig contest to Steve Ramsey (Woodworking For Mere Mortals) he and I agreed it would be a fun summer event. The response was overwhelming with over 6000 video views of the videos relating to the contest and many great comments from woodworkers all over. So it was decided early on that this would be ...

Read this entry »


View James Lango's profile

Milling Cherry

09-22-2008 07:33 AM by James Lango | 8 comments »

Does anyone know what is the MAX width of certain hardwoods? The most accomodating to resist warp and cup? An old guy once told me that he was able to mill Elm 14” wide boards because Elm is very stable and resists warp/cup. Should you stick around the 4-6” range for Cherry? Or can you go wider?Different woods have certain characteristics and someone out there knows.. Any advice? thanks

Read this entry »


View Izzy Swan's profile

Rustic Furniture #1: Four Yrs in The Making

08-22-2013 07:20 AM by Izzy Swan | 6 comments »

I have spent the better part of my life building what I would call rustic furniture, I love the experience of going out into the woods and find some unique natural branch, bark or burl and incorporating it into a design.. Doing this thing on YouTube where I have been sharing ideas and jigs that I build to (I hope) inspire people to thinking out side of the realm of traditional craftsmanship and maybe try something new.. any way the link below is to a slide show of a few off the pieces I have ...

Read this entry »


« prev 1 2 3 4 5 6 7 8 next »
77 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase