Well this week was a busy week and I didn’t get to make a video project for this past Wednesday. So I thought I would Share this quick project video with you today. For a recent project I needed to make a larger version of an angle gauge to allow me to get the exact angle of an inside corner of a corner shower. After borrowing one from a fellow woodworker, I decided I needed one for the shop. Here is a look at making the simple but very useful over sized angle finder. These are commonly...
I have spent the better part of my life building what I would call rustic furniture, I love the experience of going out into the woods and find some unique natural branch, bark or burl and incorporating it into a design.. Doing this thing on YouTube where I have been sharing ideas and jigs that I build to (I hope) inspire people to thinking out side of the realm of traditional craftsmanship and maybe try something new.. any way the link below is to a slide show of a few off the pieces I have ...
In this video I show you how to make a simple yet elegant lift lid box. These little boxes can be made with with different woods to give them their own character, and due to the simplicity they can be made in batches.. They make a great gift to give someone. The boxes in the videos are made from Spalted Pecan, White Oak, & Mahogany. Each Box was finished with 2 coats of Danish Oil to bring out the natural beauty and color of the woods. Also in the video I talk about an upcoming project...
What Is Burl? I have discovered that this question is the most searched question for burls on the internet. Over 140,000 times world wide per month. So I read what Wikipedia’s definition is and found out that they are not clear and in some details are wrong in their definition. So I am going to attempt to clear the muddy waters. First of all Wikipedia says: “A burl (American English) or bur or burr (used in all non-US English speaking countries) is a tree growth in which the grain ha...
Thanks to Martin and his magic shuffle button my need to multi-task has taken on a new urgency. Today as I sat here, caught in the trap of the LJ Addiction, I also contemplated how I was going to put a few pieces of willow together for a box – and what purpose it would have. I decided that I would just have to go cut the wood and glue it together whatever way would fit and it would become a “just is” box, for whatever purpose it might have in the future. After getting ...
Hey everyone, Just wanted to share a couple of shop Jigs with you. One is a quick and simple jig for quartering your sheets of sandpaper to use in your palm sanders or sanding blocks. The second jig is a multi function tapering Jig that lets you do 4 sided tapers as well as straight edging rough sawn boards and cutting angles also.. There could be many more uses, there are just the 3 I focus on in the videos. Part 1 Part 2 Part 3
Although all my previous designing, my efforts to get the piece of furniture to the very best end I can, usually met lots of minor cuestions to be solved, before finishing the job to my complete satisfaction. And this is the reason why the work sticks to the bench towards the end. Actually I’m never 100% satisfy. That’s the price I pay for the personal discoverys that represent my designs. Others don’t find it that much important, but it i...
I’m just getting this blog post started so it already set up, but in the next 6 months I should have everything up and running for me to build wooden boats for people. I’ll be starting out with some strip built kayaks and canoes most likely. In all actuality I have no idea what people are going to want. I plan on just getting the word out and let people come to me so we can sit down and draw up exactly what they want. After I’ve got a good thing going I will start cold moldi...
Does anyone know what is the MAX width of certain hardwoods? The most accomodating to resist warp and cup? An old guy once told me that he was able to mill Elm 14” wide boards because Elm is very stable and resists warp/cup. Should you stick around the 4-6” range for Cherry? Or can you go wider?Different woods have certain characteristics and someone out there knows.. Any advice? thanks
Recently I purchased a Steam Bending Kit from Rockler Woodworking and Hardware so I could try out some Steam Bending. Bending wood is something I have never tried before and is out of my comfort zone. I wanted to dive into this area of woodworking and challenge myself as well as learn something new. So of the various forms of wood bending (Laminated Bending, Milled Bending, Steam Bending) I chose steam bending to be my first attempt. The kit I purchased included the reservoir, hose, and so...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 105 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 418 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 245 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- A Slice of Wood Workshop - 190 entries