814 days ago
by Lee A. Jesberger |
32 comments »
It’s been a while since I posted any projects, so I figured I’d better do so before you all forget my name.
I previously posted a Library stair unit, and this table is the accompaning piece of furniture to that.
The client needed a conference table, but he also wanted a workbench, as he was prone to dismantel his computer occasionaly, in name of improving it.
He was a fan a George Nakashima, so he wanted the table fashioned in his style. My design seemed to ...
Read this entry »
864 days ago
by Jeff |
15 comments »
This is my interpretation of this cleverly designed bench by Fine Woodworking’s shop manager, John White. There have been a few mentions of this bench on the site and I have been eagerly anticipating having the time to build my version of the bench.
I’ve had the lumber for about a month but had to sacrifice time in the shop to get our condo ready for sale this summer. Those preparations are all behind KT and I now and I can finally work in the shop when I want to. We’ve h...
Read this entry »
814 days ago
by Lee A. Jesberger |
14 comments »
I thought I would include a few more photos, showing the construction details.
I’m not sure why I always end up with the photos in reverse order, but maybe you should start from the bottom!
Completed top, waiting for the edge shaping and butterflies.
My stepson, Evan, inspecting our work.
Lee and Evan installing 1/8" thick, Wenge edge banding.
The underside, fitted and stained. The holes allow attaching the top to the frame.
Evan measuring for the stainless inserts...
Read this entry »
856 days ago
by Jeff |
13 comments »
Hullo, folks. I’ve been sneaking in a little more time on the bench and have an update. In the last entry I mentioned a snaffu with my chamfers. I got those all done in short order on the router table. I even took a chance on the leg I had already assembled. The fit with the lag bolt was of course a little looser when I reassembled the leg but nothing to get uptight about. This was pleasing.I put the legs together and then drilled my holes for the lag bolts in the ends of the stretcher....
Read this entry »
835 days ago
by Jeff |
12 comments »
I have just about finished the bench. As it is right now, everything is functioning and I have moved it over to the actual work area. Tasks completed include:1) Mounted clips on the stretcher for the face clamps;2) Drilled holes in the bars of the face clamps so they can be adjusted with speed pins;3) Milled and mounted the drop-in clamping blocks for the tail vice clamps (used in the well);4) Cut and mounted the planing wedge to the front rail.
Here are the pics.I don’t have a pic of...
Read this entry »
78 days ago
by CaptainSkully |
9 comments »
After letting the glue cure overnight, I took it out of the clamps and gave it a final hand sanding. Not too bad, but could be better. I think next time I’ll err on making the legs touch on the outside corners instead of a flat meeting. This caused some gappage that I filled with putty.
Since our dog laid down by the tent, I figured it was time to fume. There’s no better time than the present. I carefully put the tent over the table and then propped them both up en...
Read this entry »
840 days ago
by Jeff |
8 comments »
I have an update on the bench. The top is completed and I’m nearing the home stretch. I’m already starting to come up with ideas for special uses/jigs for the inserts in the well…
I measured and drilled the holes for the end supports of the well and then threaded my pipe stock and checked for level. I also cut the blocks that are moved when you need to adjust the lateral clamps and positioned them above each leg and the center support. I laid in the MDF panels to make sur...
Read this entry »
793 days ago
by Ethan |
7 comments »
The box so far:- I’ve dimensioned the lumber and cut the miters- I cut the lid and bottom panels to size, cut rabbets into the lid, and glued suede cloth to the inside of the bottom panel and veneered a piece of white oak to the outside of the bottom panel- I inlaid the bog oak square and cut the oval for the red jasper cab- I glued up the box
That takes us to this…
You can see some of the nail and worm holes in the sides and lid; I could have left that out of the design, bu...
Read this entry »
845 days ago
by Jeff |
7 comments »
Last week I finished drilling many holes for the sides of the well. These included the holes for the clamping bars as well as the pilot holes and countersinks for the confirmat screws. This took a bit of time because of all the measuring and trial and error positioning to ensure I didn’t make any major mistakes since the FWW plans were subject to interpretation and my sketchup plans (last entry) were a little inaccurate regarding the size of the clamping bars. It paid off though.
For ...
Read this entry »
109 days ago
by CaptainSkully |
6 comments »
At first, I was enamored with #802, as done so well by Dale
I looked it up in Robert Lang’s book “Shop Drawings for Craftsman Furniture”. I found an article on building it in Woodworking Magazine, Summer 2009 edition. I felt like I had done my homework and thought I might slip this in between the dining table and the chairs. We already have decent chairs.
I didn’t really realize it until I saw Stickley Sideboard #818 at the Arts & Crafts Fair in San Fr...
Read this entry »
1 2 3
23 entries
