Finally I got it done and shipped it off to the customer. He wont get it in his hands until next week, so I will post his impressions when I hear back. I hope its what he wants!!! TIP:Some of you may know about this but many will not. This is my secret to quickly fine sand the box prior to spraying lacquer. I hand sanded down to 220 and then I finish up with green nylon pads. These were bought at the local dollar store. Guess how much? Thats right, a whole dollar. You can buy similar pads ...
Hey everyone, It was suggested that I start a discussion on how to find and harvest burls. Please give your input also. I don’t deal with straight grain that often. I cut and sell burls for a living so here is what I know. It is illegal to harvest a burl without permission. of course if it is on your own property you can give yourself permission. What I do is put an ad on Craig’s list saying I want your burls. Most people don’t know what burls are. So you don’t get that many calls....
Updated 1/15/12 How to make an Art Box by Andy Campbell Safety Be safe! Guards, etc…may not be visible in the pictures. This is written for woodworkers of all skill levels.But, please keep in mind that this is not woodworking #101. I am writing this in a step by step manner that should be easy for a beginner to follow, but some basic understanding of tools and terminology is required.I ask that the more advanced woodworkers be patient and not be offended. I don’t wish to test your...
It’s been a while since I posted any projects, so I figured I’d better do so before you all forget my name. I previously posted a Library stair unit, and this table is the accompaning piece of furniture to that. The client needed a conference table, but he also wanted a workbench, as he was prone to dismantel his computer occasionaly, in name of improving it. He was a fan a George Nakashima, so he wanted the table fashioned in his style. My design seemed to ...
Updated 1/16/12 This is the fun part! Its scary too! The idea of taking a nice crisp box, one you have spent countless hours making, and attacking it with a tool designed for slag removal is…well…its a little disturbing. Maybe I was influenced by old Hitchcock movies more than I know. Seriously, what I enjoy is the freedom this gives me. Everything up to this point has been tied to measurements and careful setups. This is where we can cut loose a little. But slow down Hot...
The handle.I did not like how the handle was looking, it appeared to lack any of the swirling grain that the top inset panel has. That happens sometimes after shaping, the good stuff ends up on the floor. Also… if you look close, you will notice in the picture below that I sanded too deep into the right corner of the handle and exposed the spline! Oops! So I made a new one from Black Palm Wood, a first time for me. The black color ties in with the Wenge corner splines, plus I love ...
Hey everyone! I just finished this Video to teach the basics of discovering good figured wood.Hope you like it and would love your feed back and additions. ThanksGregOregonburls
This is why its been awhile since my last post. One of the problems with shaping wood to this extent is any flaws show up. Figured Bigleaf Maple, aka Western Maple, Oregon Maple, Acer macrophyllum, can have pits, bark inclusions, etc… Well, I found a few during the final shaping. I knew I was getting pretty close to maximum depth in one corner, but I couldnt leave that little black spot glaring at me. Then I was all the way through and exposing the bloodwood below, nothing ...
I have always been a big fan of the art deco style and early 20th century skyscrapers so I decided to combine both for inspiration for my virtual table design. After plowing through tons of images I found a really great art deco mirror from the 1930’s that really inspired me for the tabletop..For the leg inspiration I used my favorite skyscraper ever designed The Empire State Building!...So this is it..my Art Deco Empire State Dining Table! The material is tiger maple and wenge. The top...
Hey everyone, I was asked by a few of you from my blog “How to find legal burls” “once I get them how do I cut the burls”? Well I just made a short vidio on how I cut to the burl in the context of a bowl or hollow form blank. Please coment and add if I don’t cover it well. If you not want to go thru the hassle of finding and cutting your own you can alway buy from me. LOLThanksGreg Thanks Todd on the tip for getting the video on this post.
- My Journey As A Creative Designer - Woodworking and Beyond - 1792 parts
- Extremely Average - 324 parts
- Toy costruction - 115 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Woodworking on a Half-Shoestring - 82 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1817 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 241 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 210 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries