Making decorations is fun. Woodworking, welding, and smithing are also fun. This time I combine them all and create a decorative sled. This is a very simple project that will get plenty of years use. Check the video out, leave comments, and make sure to like and subscribe! Click here for video. Also, does anyone know where the old embed code went to? I can no longer see it on YouTube to embed the video here.
I’ve remodeled the entire house. Always a work in progress but mostly done. Ripped out walls, replaced paneling with sheetrock/paint, replaced carpets with hardwood floors, I made new kitchen cabinets, all moldings… etc. I’ve blogged most of it as I went along. The hole in the ground:We have a cellar that takes up about half the floor area of the house. The rest is a slab. It is a washroom, storage, houses the hot water tank, pump tank, etc. It’s finished off pretty...
Spent a few hours today cutting, grinding and welding. The main base assembly is all welded up. I am going to finish (grind) some of the welds, clean the rust off of the steel and get ready for the feet and casters. Overall pretty productive day so far… I am just going to post a bunch of pictures, if anyone has any questions, just let me know! Cut tubing Fitting the miters Tacked up one side Tight fit Layout for end caps End caps rough cut Caps welded Some wel...
I am going to try doing a Blog. Although this project is going to be a metal working project, it is for a wood working tool. :) I ordered my Sawstop 3HP PCS a few weeks ago and it will arrive next week (4/1). I am on vacation the following week so I plan to get it assembled and tuned up. I was planning to get the mobile base for free (the promo that they are currently running) but as I was doing some thinking, I decided against it and will get the dust collection instead, for two reason...
Ok, so it’s much more fun to dance than to fix…. Apparently welding a frame should not be undertaken without proper support, or ahh… more experience. The frame had a twist to it across the 59.5” length! I cleared a section of the shop floor (miracle) got out my door installation level and found a fairly level area. I then proceeded to use some shims to adjust the floor until the it was perfectly level. Gotta give credit to the guys that screeded the floor some 50 y...
The mobile workstation is in my opinion going to be the center of my workshop once its built. An integrated router table, table saw, downdraft table and ample storage in a ~ 5’ x 2’ area on wheels! Certainly not my idea, however, the layout will be done solely by me. I am open to all suggestions though, so please feel free to brainstorm here and let me know what has worked for you, what you would do differently if you had to build one again, etc. All comments and suggestions are w...
Hello everyone. I have been busy making stuff and have finally finished a video that has been almost a year in the making. I made this video to be like a commercial for me and my work so it doesn’t give any tutorial. I do have a series of videos to be published soon that are more along that line. My goal as a video maker is to provide the viewer with an alternative to the typical format of woodworking videos; where a guy stands across the bench and talks at the camera, showing lit...
see the whole story, with the music i wrote while building these projects! @ http://refinedhomerelics.blogspot.com
I spent the day metal working… But it’s going to make my woodworking easier. I needed a way to lift big logs onto my sawmill and to turn them while sawing. So, I took some steel channel material and some flat stock and welded them into a support stand. Now that I’ve made one welding project, I have many more projects that I’ll need to weld. Now that the metal work is finished, I’ll add a 4” X 6” white oak beam to the bottom steel plate to fit under...
Tool rest for my jet lathe made from scap iron.
- My Journey As A Scroll Saw Pattern Designer - 1659 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1684 entries
- frank - 417 entries
- dbhost - 400 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 281 entries
- William - 258 entries
- shipwright - 229 entries
- Betsy - 225 entries
- Stevinmarin - 212 entries
- stefang - 206 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 200 entries
- robscastle - 189 entries
- Rustic - 189 entries
- BritBoxmaker - 188 entries
- Chris Davis - 184 entries