02-07-2011 10:24 PM
by PurpLev |
10 comments »
I’m awaiting a benchtop milling machine which weighs about 500lbs, and with the expense of the machine + additional tooling that would probably follow (vises, cutters, tool holders, etc) I wanted to be able to minimize the expense on the stand.
most stands are in the 150-400 range (including shipping and such), which would be better used for other things. I still have some extra 4×4 FIR from building my workbench, and figured I might as well just use that. My first concept was t...
Read this entry »
08-26-2011 08:38 AM
by GodofBiscuits |
6 comments »
So I’ve had a little luck (Big thank you to WoodArtbyJR) getting a hold of the Hobby Hall people at the Fair and talked about my options for displaying the clock. The first option was a half wall above the display cases they store most the entries. This would be ok if the wall wasn’t 4 feet tall and started more than 6 feet above the ground. This meant, my clock would have to be displayed without the pendulum as the entire clock is over 5 feet in length with the pendulum installed...
Read this entry »
08-29-2011 12:01 AM
by GodofBiscuits |
6 comments »
Today was the day! I drove out to Puyallup and dropped off the clock. The stand and clock fit very nicely in the car and had tons of room. Upon arriving at the fair grounds and finding the appropriate area to drop off, I was greeted by one of the volunteers. After some confusion about size maximums (item must not be more than 80 inches over all, width + length) I got everything out of the car and began setting up. Thankfully there were plenty of people on hand to settle the dimension confusio...
Read this entry »
06-21-2009 09:54 AM
by Gary Fixler |
4 comments »
In a comment by Topamax in this post he made some assumptions, and ran some numbers, and got 188lbs for the largest Eucalyptus log I managed to lift into the truck and bring home from Canoga Hills. I really felt it was over 200lbs, so today I set this up:
It’s just some scrap weathered pine stacked up into a makeshift ramp to my bathroom scale out on the patio, with some 2×4s on the scale to keep the log from pressing its central buttons, or marking up its face. The 2×4...
Read this entry »
01-30-2013 03:11 AM
by grfrazee |
3 comments »
I’m sure there are those of you interested in how much this thing weighs and (more importantly) how much it cost to build.
A quick volume estimate puts the total amount of wood at ~5 cubic feet. Considering an average specific gravity of about 0.60 (range for SYP is 0.54 – 0.65, and the hickory is more than that), the weight is:
(5 cu. ft.)(62.4 lbs/cu. ft.)(0.60) = 187 lbs
So, the wood alone is about 190 lbs. Factor in the weight of the vise hardware and the many metal...
Read this entry »