I’m sure there are those of you interested in how much this thing weighs and (more importantly) how much it cost to build. A quick volume estimate puts the total amount of wood at ~5 cubic feet. Considering an average specific gravity of about 0.60 (range for SYP is 0.54 – 0.65, and the hickory is more than that), the weight is: (5 cu. ft.)(62.4 lbs/cu. ft.)(0.60) = 187 lbs So, the wood alone is about 190 lbs. Factor in the weight of the vise hardware and the many metal...
Today was the day! I drove out to Puyallup and dropped off the clock. The stand and clock fit very nicely in the car and had tons of room. Upon arriving at the fair grounds and finding the appropriate area to drop off, I was greeted by one of the volunteers. After some confusion about size maximums (item must not be more than 80 inches over all, width + length) I got everything out of the car and began setting up. Thankfully there were plenty of people on hand to settle the dimension confusio...
So I’ve had a little luck (Big thank you to WoodArtbyJR) getting a hold of the Hobby Hall people at the Fair and talked about my options for displaying the clock. The first option was a half wall above the display cases they store most the entries. This would be ok if the wall wasn’t 4 feet tall and started more than 6 feet above the ground. This meant, my clock would have to be displayed without the pendulum as the entire clock is over 5 feet in length with the pendulum installed...
I’m awaiting a benchtop milling machine which weighs about 500lbs, and with the expense of the machine + additional tooling that would probably follow (vises, cutters, tool holders, etc) I wanted to be able to minimize the expense on the stand. most stands are in the 150-400 range (including shipping and such), which would be better used for other things. I still have some extra 4×4 FIR from building my workbench, and figured I might as well just use that. My first concept was t...
In a comment by Topamax in this post he made some assumptions, and ran some numbers, and got 188lbs for the largest Eucalyptus log I managed to lift into the truck and bring home from Canoga Hills. I really felt it was over 200lbs, so today I set this up: It’s just some scrap weathered pine stacked up into a makeshift ramp to my bathroom scale out on the patio, with some 2×4s on the scale to keep the log from pressing its central buttons, or marking up its face. The 2×4...
- My Journey As A Scroll Saw Pattern Designer - 1598 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1623 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- Betsy - 221 entries
- shipwright - 220 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 187 entries
- Chris Davis - 183 entries
- Smitty_Cabinetshop - 176 entries