Woodworking blog entries tagged with 'waterlox'

  • Advertise with us
View OSU55's profile

Finishing #2: BLO, Oil, Poly

03-26-2016 05:41 PM by OSU55 | 6 comments »

Lots of questions come up concerning various “oil” and poly finishing mixtures and methods. Below are links to two articles by Bob Flexner that provide a great deal of information on the subject. The first is from 2008, the second from 2011. The short and sweet version is plain old varnish, poly/alkyd/phenolic (poly...

Read this entry »

View harum's profile

Walnut kitchen countertop #7: finishing

02-16-2014 04:55 PM by harum | 0 comments »

This is the countertop after application of two coats of Waterlox. The color looks good: dark enough and warm. Waterlox (Original) turned out to be very thin and runny, and after two coats the surface is still patchy and with what feels like a thin film. The pores are still showing. This may be good for penetration into wood and sealing it; will take though more than four coats I planned as a finish at the beginning. Have to wait over 24 hours between coats because of the tem...

Read this entry »

View Karson's profile

Refinish my Shaker Table Top

10-03-2011 11:40 PM by Karson | 20 comments »

My Shaker Hall Table that I had placed against the wall in the kitchen became a final resting spot for some items. The ones that caused the problem was a Sheave of Wheat which had been died dark brown., a fish bowl, a wicker basket that had honey and syrup placed in it. The table top looked like this. The gray stains were the syrup and it had gone below th surface because water wouldn’t clean it up. I was contemplating running it through the plainer again, but I opted ...

Read this entry »

View kshipp's profile

Rockin' Ride #5: Finishing and final assembly

01-15-2009 06:27 AM by kshipp | 2 comments »

Refers to project posted here. The dry fit passed inspection from my quality inspector so it was time to move on to finishing. I disassembled it to three major components and put on Minwax Dark Walnut Stain. Of course I did this on my finishing/pool table. You can see the unstained head sitting on the table also. I installed the handle in the head with glue and two finish nails through the edge to hold it steady. I am using Waterlox Original Medium as a sealer and it’...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics