LumberJocks

Woodworking blog entries tagged with 'video'

  • Advertise with us
View lethentymill's profile

The Non-Electric Chair #10: Waiting for Beech To Dry

11-16-2008 05:23 PM by lethentymill | 2 comments »

Leaving the tool chest for a moment; we go back a few years to the Domesday Book and 1086 and an interesting fact – 13 saws were recorded in the kingdom, bowsaws were common at the time so what kind of saws were these? Probably not sawmills; mills are mentioned aplenty and millponds too but they were agricultural mills. These are probably pitsaws, a gruelling job for two men; one of them in the pit and the other steering the two-handed saw and balancing on the level tree-trunk as they r...

Read this entry »


View tooldad's profile

Woodworking Safety #5: Band Saw Safety Video

11-16-2008 05:04 AM by tooldad | 3 comments »

Here is another in my series of safety videos for student make-ups who miss the in class demos. 2 parts to make it fit for youtube. http://www.youtube.com/watch?v=FNa1_tcDo1g http://www.youtube.com/watch?v=qhwFk-64IBw I included the links to the videos also just in case.

Read this entry »


View tooldad's profile

Woodworking Safety #4: Drill Safety & Operation

11-16-2008 05:00 AM by tooldad | 3 comments »

Finally got a couple more safety videos made for my students who miss the demos in class. This one is on the drill. Took breaking it up into 3 parts to make it fit on youtube. Here’s the drill video http://www.youtube.com/watch?v=SwazHacw3jc http://www.youtube.com/watch?v=p0yyOyb3XXE http://www.youtube.com/watch?v=_UjUPb7O6XA I included the youtube links just in case

Read this entry »


View teenagewoodworker's profile

A little break from Serious!

11-16-2008 04:34 AM by teenagewoodworker | 33 comments »

Well, a little while ago i had a visit from someone that a lot of us around here know and we were able to get some filming done! so here are a couple little things we did! hope you’all like it :) So i hope that you’all liked it! next time I’m going to do a video on some little finial boxes that i am making for Christmas. so i hope everyone liked it and i hope to see you again next time.

Read this entry »


View David's profile

Woodworking in America 2008 - Part III

11-15-2008 10:54 PM by David | 1 comment »

”A good furniture man always has a tape!” This is Part 3 from our interview with Neil Lamens of Funitology Productions fame from his first full day at Woodworking in America 2008. In this brief installment, Neil shares some additional thoughts about connections with fellow woodworkers and his trip into the town of Berea (The Folk Art & Crafts Capitol of Kentucky) with woodworking friend Chuck Middleton. Do you have a tape in your pocket? We have more to come from Neil...

Read this entry »


View David's profile

Woodworking in America 2008 - Part II

11-15-2008 03:19 AM by David | 1 comment »

This quick video is live from Neil Lamens of Funitology Productions fame. Neil share thoughts from his first seminar with chair maker Brian Boggs and the awesome feeling of making connections with fellow woodworkers. Neil met up with internet woodworking friend Chuck Middleton, a frequent member of The Rough Cut Show Rough Cutters Forum. What glue was Neil referring to from the chair making session with Brian Boggs? Hide glue of course! Don’t forget to check out Patrick Edwards Ol...

Read this entry »


View David's profile

Woodworking in America 2008 - Part I

11-14-2008 10:06 AM by David | 2 comments »

A special treat for those of us unable to attend the 2008 Woodworking in America Conference sponsored by Popular Woodworking and Woodworking Magazine. This quick video is live from Neil Lamens of Funitology Productions fame on the first evening of the conference. During the conference check in Neil ran into Mark Vanderlist from Matt's Basement Workshop. Sounds like a great conference!

Read this entry »


View David's profile

Neil Lamens interviews famed marquetuer Silas Kopf

11-13-2008 07:44 AM by David | 7 comments »

This entry is a quick heads up regarding another great video interview by Neil Lamens. Neil & Gigi recently went on a road trip to East Hampton, MA to visit the famed marquetuer Silas Kopf. During the video interview, Silas made of a tulip that Neil “wove” in and out of the discussion. Silas took Neil on a shop tour and introduced us right hand and cabinetmaker Tom Coughlin. While discussing a current cabinet in production, Neil and Silas talk about traveling to visit hi...

Read this entry »


View Keith Cruickshank's profile

Test Drive Five Popular Hand Planes Types

11-11-2008 04:03 AM by Keith Cruickshank | 5 comments »

I know that most of us covet that next slick power tool. I’m like that too. But I’ve also come to appreciate hand planes for their ability to make quick work of tasks that can’t be done easily by machine. In this video we take a look at five types of hand planes that are commonly found in wood shops. By the way, if you’re a regular WoodTreks viewer, you know that usually I’m behind the camera, featuring some of America’s top artisans. But to mix things...

Read this entry »


View Callum Kendall's profile

Workshop #11: Shop cam!

11-10-2008 08:25 PM by Callum Kendall | 3 comments »

shop cam is now working, however it will be a while until the shop will be full finished! Live TV : Ustream Thanks Callum

Read this entry »


« prev 1 ... 520 521 522 523 524 525 526 ... 547 next »
5461 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com