Hey everyone, It was suggested that I start a discussion on how to find and harvest burls. Please give your input also. I don’t deal with straight grain that often. I cut and sell burls for a living so here is what I know. It is illegal to harvest a burl without permission. of course if it is on your own property you can give yourself permission. What I do is put an ad on Craig’s list saying I want your burls. Most people don’t know what burls are. So you don’t get that many calls....
It’s about time! We finally got a good job with a lot of carving. It’s a three piece bedroom set. The style is close to the early Victorian Period. Their are 4 Scroll Acanthus leaf’s that I designed, two that go on the bed and two that go on the dresser. Now I am starting on the 8 turned legs with acanthus leaf carvings on them. All the carvings are out of solid cherry. Here are 33 pictures, on how to carve this type of “Architectural Ornament onlay application̶...
I recently finished working on a cutting algorithm app for the iPad and iPhone called Smart Cutter, and wanted to share the app with every one hoping get some feedback from carpenters and wood workers. Smart Cutter finds the maximum number of small pieces cut from a larger sheet of paper with minimum scrap. It employs a state of the art algorithm to generate the maximum number of small pieces cut from a larger sheet of paper, wood, cloth or any other material, with minimum waste. Whether y...
In this episode I go over the installation of the drawer slides. It is very important to remember that the width of you drawer box is the key to a successful slide installation.
Here starts something I always wanted to make. A pie crust table. This picture will give you an idea of what it will look like.. ..Now mine will have a top that looks like this one, but I plan on doing something different for the legs. I will be unique. It’s something that just came to me... Lets start with the top. I had the perfect piece of 6/4 mahogany that I have been saving for this. The problem is that it was a little too short for the diameter top I wanted to make. Here ...
I was kind of proud of myself yesterday. I stayed focused. I was disciplined. I pretty much did nothing but draw all day. I did take an hour out to go for a hike in a new place in the woods near the house and that was nice and refreshing. The air was quite brisk and for the first time this year I had to put on layers of clothing to keep warm. But I was warm enough and the walk was just what I needed for a break from the computer. It reminded me how pretty things are around me. As we ...
My Journey As A Scroll Saw Pattern Designer #513: I'm Really Getting Excited About This Next Project!
Although I made great strides yesterday, I am still not quite at the finish line. Sometimes things are just like that. While I anticipated that I would be done with drawing this new set of ornaments yesterday, I just finished up the sixth piece last night and I was tired and had to quit for the evening. It was about 9:30 and I had worked on them most of the afternoon and my eyes just couldn’t take any more. I started my day early yesterday (the usual 5am) and I did accomplish qu...
Online Scroll Saw Class - Incredibly Fun Adventures in Scroll Sawing #8: Lesson 8 - Cutting Inside Curves and Swirls
By now you have had some time to practice cutting inside and outside corners. While getting nice sharp corners is really important to your scroll working, one of the signatures of traditional fretwork pieces are the graceful curves and swirls that you are able to cut with the scroll saw. In Victorian times, fretwork was cut either by hand or by using foot powered pedal saws. It was a delicate and painstaking process and took years of practice to master and accomplish. With the intr...
After a month of development based on the feedback I got here, I finally managed to release Carpenter Pro, this time, it calculates how many plywood sheets are needed to finish your project and get detailed cutlist diagram for each stock sheet needed. It allows you to specify the dimensions & grain direction for your stock sheets material, specify the dimensions and the required grain direction for each part you need to cut for your project, and set the kerf amount, then watch this app ge...
I made a great deal of progress yesterday in my ornaments. I am truly happy with them so far and I look forward to finishing them up today. I finished cutting the final two by around noon, and I also remembered to take step-by-step pictures of the final one so that I can include them in the instructions. That is something that I sometimes forget about when doing projects such as this. I am so engrossed with seeing if things will work out as I planned, that I forget to do the obvious. ...
- My Journey As A Scroll Saw Pattern Designer - 1558 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1583 entries
- frank - 417 entries
- degoose - 395 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 275 entries
- William - 258 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- shipwright - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 188 entries
- Rustic - 188 entries
- Chris Davis - 183 entries
- BritBoxmaker - 181 entries
- Smitty_Cabinetshop - 175 entries