It’s about time! We finally got a good job with a lot of carving. It’s a three piece bedroom set. The style is close to the early Victorian Period. Their are 4 Scroll Acanthus leaf’s that I designed, two that go on the bed and two that go on the dresser. Now I am starting on the 8 turned legs with acanthus leaf carvings on them. All the carvings are out of solid cherry. Here are 33 pictures, on how to carve this type of “Architectural Ornament onlay application̶...
One of the parts of woodworking that many would like to do better is finishing, and that includes me. On my quest to obtain the background I have bought books, talked with professionals in the field, and searched high and low on the internet to find the answers to my questions. Some of the questions arose as I was completing a project but others were generated by what I had read. As I have gotten older I say to myself, “I know I have read something about this particular procedure”, but I...
RIGHT CLICK ON THE PICTURE, CLICK ON ” OPEN IN NEW TAB ” TO SEE THE FULL PICTURE.First, make leg template.Cut stockRound over one edge, 2 left, 2 right.Using table saw, make your spline cut.Cut your splines and check for fit. This is what you should end up with.Start laying out your leg build up.Make sure your build up clears the template.Glue it up.Line up the template with your stock and trace it.Cut it out on the band saw.Cut both sides on that face then tape the scrap back on ...
Here starts something I always wanted to make. A pie crust table. This picture will give you an idea of what it will look like.. ..Now mine will have a top that looks like this one, but I plan on doing something different for the legs. I will be unique. It’s something that just came to me... Lets start with the top. I had the perfect piece of 6/4 mahogany that I have been saving for this. The problem is that it was a little too short for the diameter top I wanted to make. Here ...
Online Scroll Saw Class - Incredibly Fun Adventures in Scroll Sawing #8: Lesson 8 - Cutting Inside Curves and Swirls
By now you have had some time to practice cutting inside and outside corners. While getting nice sharp corners is really important to your scroll working, one of the signatures of traditional fretwork pieces are the graceful curves and swirls that you are able to cut with the scroll saw. In Victorian times, fretwork was cut either by hand or by using foot powered pedal saws. It was a delicate and painstaking process and took years of practice to master and accomplish. With the introduc...
HEAR YE, HEAR YE!! Yes, Virginia we now have definitive proof that cavemen did enjoy scooping coffee! In fact cromagnun man (and woman) were the precursor to modern day Starbucks. In response to my recent posting of a neanderthal period coffee scoop, that was presented alongside a lovely model crafted by my L/J friend Jerry W, it was suggested that we begin an archelogical study, a challenge or showcase if you will of scoops and spoons. Because it was my shamelessly (or was it shamefacedl...
This is what the completed bed will look like. These are the spokes for the 48” back wheels. This is the rim for the front wheels. These are the front wheels. Front and back wheels. The radius at the bottom of the spokes was cut on the table saw by locking down the miter gauge and pushing the wood into the blade from the side and it was done in 4 passes. We used an 8” dado blade. This is the back of the wheel where the axle will go into Ne...
With the holidays right around the corner, I thought it was a perfect time for a contest. I want you guys to build a Keepsake or Jewelry Box. It can be any Shape and size, just be creative. The Contest is from October 3, 2012 – December 3, 2012 So there is plenty of time to get out out in the shop and get building. We have some great prizes to give away thanks to the support of our contest sponsors. Laguna Tools Woodworkers Guild of America Rockler Woodworking & Hardware A Simple...
Hey everyone, It was suggested that I start a discussion on how to find and harvest burls. Please give your input also. I don’t deal with straight grain that often. I cut and sell burls for a living so here is what I know. It is illegal to harvest a burl without permission. of course if it is on your own property you can give yourself permission. What I do is put an ad on Craig’s list saying I want your burls. Most people don’t know what burls are. So you don’t get that many calls....
Consideration #2 If you have fruit tree burls or burls like madrone there are two ways you can semi-stabilize the burl.1. Pressure cook the block:a. I have a friend in New York who gets 12×12 x 6 blocks of Madrone and when he gets them the first thing he does is throws them in the pressure cooker for one hour.b. Let the water cool down until you can comfortably take the blocks out with your hands. Then re-wax them until ready to turn the bloc...
- My Journey As A Scroll Saw Pattern Designer - 1197 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- As The Lathe Turns - 67 parts
- Workshop Development - 66 parts
- Sheila Landry (scrollgirl) - 1219 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 332 entries
- Ecocandle - 325 entries
- MsDebbieP - 301 entries
- Martin Sojka - 297 entries
- Karson - 294 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- mafe - 207 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- stefang - 145 entries