I have been thinking about going into woodworking full time. I like to work with wood all the time, what does that say about me ? Does anyone do woodworking full time ? I just don’t know what would be a good product to make and sell. Does anyone have any ideas ? Some pointers and tips would be good. I like making lathe stuff but I don’t think there is much money in it. Maybe some furniture or boxes ?
One of the things missing on this site is making knife scales. This is not something I normally do but I bought my wife some knives that required scales and during the process, noticed that we had several knives where the handles looked like crap, were cracked, and even broken. Some of them had really good blades and some were junk (these were tossed). During this process, the knives that I bought from Woodcraft have really nice blades but the rivets were less than desirable, sam...
I just cut into some more Black walnut. The 2 pieces are 14 1/2×32 x 4I keep getting impressed by our creator!
This is what the completed bed will look like. These are the spokes for the 48” back wheels. This is the rim for the front wheels. These are the front wheels. Front and back wheels. The radius at the bottom of the spokes was cut on the table saw by locking down the miter gauge and pushing the wood into the blade from the side and it was done in 4 passes. We used an 8” dado blade. This is the back of the wheel where the axle will go into Ne...
I made a great deal of progress yesterday in my ornaments. I am truly happy with them so far and I look forward to finishing them up today. I finished cutting the final two by around noon, and I also remembered to take step-by-step pictures of the final one so that I can include them in the instructions. That is something that I sometimes forget about when doing projects such as this. I am so engrossed with seeing if things will work out as I planned, that I forget to do the obvious. ...
My Journey As A Creative Designer - Woodworking and Beyond #902: Review on Using Full Sheet Labels for Applying Scroll Saw Patterns
In my recent posts, I have been discussing different ways to apply patterns to wood for scroll sawing. Since last year, I have noticed that the quality of the spray adhesive that I was accustomed to using had been on the decline. The brand I have used for the past several years has been Elmer’s, and while I first thought it just may have been an isolated incident (perhaps a bad batch) I have since purchased it from several different locations with the same results, and heard similar st...
Just started cutting into this burl. Incredible! I am not sure if I am going to cut table slabs or block it up for turners. Time will tell. Enjoy! I need to ask a favor of my friends here. Would you go to Face Book and do a search for “Oregon Burls” and Become my friend there. It would help lots. ThanksGregwww.OregonBurls.com PS Check out my new Website!!!
We have just invested in a Legacy Artisan 5 axis Milling Machine. Still learning learning it but it is fairly easy. The working deck is 72” x 24” and has the ability to turn tapered spindles.It is fun!
RIGHT CLICK ON THE PICTURE, CLICK ON ” OPEN IN NEW TAB ” TO SEE THE FULL PICTURE.First, make leg template.Cut stockRound over one edge, 2 left, 2 right.Using table saw, make your spline cut.Cut your splines and check for fit. This is what you should end up with.Start laying out your leg build up.Make sure your build up clears the template.Glue it up.Line up the template with your stock and trace it.Cut it out on the band saw.Cut both sides on that face then tape the scrap back on ...
Online Scroll Saw Class - Incredibly Fun Adventures in Scroll Sawing #8: Lesson 8 - Cutting Inside Curves and Swirls
By now you have had some time to practice cutting inside and outside corners. While getting nice sharp corners is really important to your scroll working, one of the signatures of traditional fretwork pieces are the graceful curves and swirls that you are able to cut with the scroll saw. In Victorian times, fretwork was cut either by hand or by using foot powered pedal saws. It was a delicate and painstaking process and took years of practice to master and accomplish. With the intr...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 106 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 419 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 214 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 194 entries
- A Slice of Wood Workshop - 190 entries