LumberJocks

Woodworking blog entries tagged with 'vice'

  • Advertise with us
View PanamaJack's profile

Workbench 101

02-05-2008 09:22 PM by PanamaJack | 25 comments »

Over the past several years I have been needing and wanting to buy or maybe just make a workbench. I have gone to five woodworking shows in three states over the past two years. At these shows and in several magazines or catalogs I have noticed many of these really nice woodworking benches that are way far out of my reach as far as the $$$ involved. Finally after a elongated sick spell lasting nearly two months I finally get few boards together, screws, a very few nails and other items tha...

Read this entry »


View shipwright's profile

V8 Degree wedge powered workbench #1: Some Features and Operational Videos.

08-31-2012 08:56 PM by shipwright | 25 comments »

While this is the beginning of my construction blog for the V8 Degree bench, I’m not actually going to get into the build just yet. There are a few more features that I didn’t want to clutter the project post with and I’ve added a couple of demo videos on the vices. I thought it would be best to start with a full view of the bench and its operational features first and get into the construction process in the next segment. This photo shows the dog hole inserts that hide a...

Read this entry »


View shipwright's profile

V8 Degree wedge powered workbench #2: Building the Wagon Vices.

09-02-2012 01:37 AM by shipwright | 19 comments »

OK, lets get started. I will go through the build process in the same order that I built the bench and as a non-working concept of wedge power would have been a deal breaker, the first job was to build a wagon vice or two to make sure they would work. I was fortunate enough to find a small local mill that would sell me some really nice local arbutus (madrone in USA). This is about 50 fbm and I have about ten left over. After milling up some nice 1 7/8” stock and a bit of 3”...

Read this entry »


View BigYin's profile

Wood Saw Vise Vice

04-09-2012 09:51 AM by BigYin | 1 comment »

I was looking for a design for a saw vise & found a real nice one on English eBay My Version of the Saw vice made from recycled mahogany recovered from a builders skip (dumpster).11 inches across the jaws, 17 inches top to bottom.Made from 4 & 1/4 inch by 1 & 3/8 inch mahogany with jaw linings of Ebony. Brass hinge and screws and a 10mm coach bolt to clamp jaws. One coat Danish oil.

Read this entry »


View WayneC's profile

Playing Around with Carving #9: Just Kicking Around today

08-14-2011 06:02 AM by WayneC | 18 comments »

I roughed out another spoon today. I was trying a different handle shape to get a feel for it. Playing with some curves. Also, I’m looking for good ways get a better finish on the spoon bowl. I tried sanding some. I need to get better at making smooth cuts to reduce the work required to finish the spoons. I am thinking of getting some curved knives. That or I need a wider/flatter bent neck gouge. I am thinking of a knife simlar to one of the curved ones from Pinewood For...

Read this entry »


View William's profile

Around The Coffeepot Ramblings #43: A Father's Pride

02-06-2012 02:02 AM by William | 10 comments »

.

Read this entry »


View gpastor's profile

work bench #7: What is your Vice ? - Wilton Universal Turret Vise

02-26-2011 12:48 AM by gpastor | 4 comments »

Had to cut into the base to mount my old Wilton vice. Here is some info. I found on the web about this viseIn 1959 Wilton invented what they called the Wilton Universal Turret Vise, which is in essence a Patternmakers vise. It had two jaws that swiveled into place on the turret to allow the user to hold large items for woodworking, or with a flip metal working or even pipe clamping jaws could b called into action. The patent was finally granted in 1961, but by then the vise had already been...

Read this entry »


View Morton's profile

Torsion Box Assembly Table #6: Front Vice

06-15-2010 02:07 AM by Morton | 7 comments »

The Assembly Table has been in great use for the last months.  It’s awesome to have a perfectly flat reference surface on which to assemble projects. However, one problem I’ve had since I replaced the top is the front vice.  My old top was 1.5” thick and the front vice was level with the top.  The new torsion box top is thicker (about 4”) and so the top of the vice sits about 2” below the table top.  That makes it near impossible to clamp many things an...

Read this entry »


View Eric's profile

Roubo Workbench #4: Which Vise Do I Nurse in My Bosom?

06-22-2009 04:11 PM by Eric | 13 comments »

Bear with me. It’ll make sense eventually. I’ve got two vise screws. One was generously donated by a “homeboy” from the Porch, Bill Taggart, when I visited his place a couple few years ago. The other was a $10 eBay purchase. I’m trying to decide which one to use in my leg vise. Allow me to present the two candidates, and then leave your verdict in the comments below. Candidate A is a standard metal vise screw. I dunno, looks like about an inch or so thick, ...

Read this entry »


View Wally331's profile

Saw vise build

01-02-2014 02:11 AM by Wally331 | 4 comments »

I have been in desperate need of a better way to hold my saws for sharpening. My old setup( two sticks of wood ~26 inches long which I would clamp onto saw plate and my vise) was simply not cutting it (sawing pun intended). I thought about purchasing vintage, but everyone always complained of bad vibrations, they are overpriced at antique shops, and I didn’t want to reposition my saw 4 times for full sized handsaws. I really liked Andy’s (Brit) design. It was economical, sturdy...

Read this entry »


1 2 3 next »
21 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com