Unisaw #3: VFD bench testing 3 phase 3HP
The VFD I will be using for this saw is the Teco JNEV-203-H1. As a first test I wanted to test everything on the bench. I have temporarily setup a 30A breaker and wired the 2 hots to the VFD terminals L1 and L3, the common ground to the VFD terminal PE and capped off the neutral lead. From the VFD terminals T1, T2 and T3 I ran wire to the motor leads 9 wire setup. The only functions I have set are the frequency (60 Hz), accel time and decel time (both 10s). I’m a littl...
