At last I have photos to describe one more saw cutting marquetry style. I’m new to this one and didn’t feel up to trying to describe it without good photos. The “Painting in Wood” style of marquetry cutting dates to early 17th century France and gets its name from the relationship of the typical subject material to the work of the painters of the period. The brightly colored baskets of fruit and flowers typical of many pieces of this period are examples of this styl...
Another Demilune Table. This one has a crotch Mahogany Top, with solid Mahogany legs. The legs have a little detail, just to spice them up a bit. I used a jig to cut the cove in the leg bottoms, and to cut dado’s in for a bead molding. While a dado blade in the table saw would work for the dado’s, it wouldn’t do the cove. So, I used a simple jig to do both. I used 2 layers of 3/8” bendy board for the apron, glued up in the vacuum bag, and unibond 800 Ures Resin ...
Whoever is dealing with wood, and no matter which technique, very well knows that it is not easy work .. Although it offers endless pleasure.And each of the trades has phases, its long PROCESS, where they spent endless hours patiently hidden and trade secrets ..But, other than patience, something a little gift, here and there some special secret .. In our own courses reveal secrets. In this video presentation at least in the attempt DISPLAYED PHASE ONE MARQUETRY DESIGN PROCESS, one of the ...
This larger marquetry has been quite the challenge. I’ve been pushing really hard to make the delivery date, it looks like I’m still going to be a week or two longer than expected. The next steps are bending the solid ebony inlays, then routing & inlaying them into the top. Then bending and gluing on the solid mahogany top edges, Then I’m off to the finishing booth. I haven’t had any spare time to hang out on LJ’s which I still love to do. Thank you for...
Woodworking skills are vitally important to the apprentice as well as the journeyman. As woodworkers we are continually faced with new challenges as we explore the craft of woodworking. One of these eventual challenges is band saw blade drift. .............. What is band saw blade drift? ...................... How can it be corrected? ........................................ Recommended Video: How to adjust for Band Saw Blade Drift ..........................................
Well, this is the last of this set of video episodes completing my first run at a veneering project. The panel turned out great and I am looking forward to exploring other wood species. This was a lot of fun. Trust me, if I can do this right out of the gates, anyone can! Thanks to Neil Lamens at Furnitology Productions and JoeWoodworker.com Finally the vacuum press is loaded! The vacuum quick connector attached to the vacuum bag Final 1/4 inch MDF hardboard panel veneered with Mov...
Here’s a bathroom vanity we made for a client a number of years ago. I never got back there to get a shot when the wall was finished. It’s made using Curly Maple Veneer over bendy board, and Rosewood. The curves were formed in a vacuum bag over a form, and an air bladder. The finish is conversion varnish. Thanks; Lee
“People often say that motivation doesn’t last. Well, neither does bathing – that’s why we recommend it daily.” Zig Ziglar (1926 – )...Motivational author and speaker Miraculous Staircase of Santa Fe NMThe Miraculous Staircase of the Loretto Chapel located in Santa Fe New Mexico is an amazing piece of carpentry and woodworking. If this work of art were built today, the reaction of people would be the same as it was when this set of stairs was completed...
Hey everyone,I am in need of some help! I am writing a book called “The Burl Hunter”. I am looking for interested people who are willing to read as I write to help me out. I am not a great writer but I love to teach. What I would like to do is get about 5 people to read and critique the book. Even edit my grammar. I would like 2 people who know about burls just to keep me in check and 3 to just read to learn and see how it flows. I need your input. It is a book that will g...
Practicing marquetry for my next box. It’s been awhile for me, so figuring out which style and color of veneers to use can be the hardest part, just getting started. This design took me about three weeks to come up with and will to be used for the top of a Gem Box that I am working on. Cutting out the Pearl and Abalone and inserting into this practice piece top was a little time consuming but very enjoyable. Using basically the Window Method, cutting out the sharp corners where th...
- My Journey As A Creative Designer - Woodworking and Beyond - 1751 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 109 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Toy costruction - 85 parts
- Life as an Amateur Woodworker - 80 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- Sheila Landry (scrollgirl) - 1776 entries
- dbhost - 428 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 250 entries
- Betsy - 228 entries
- stefang - 221 entries
- robscastle - 218 entries
- Dave Rutan - 217 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 194 entries
- A Slice of Wood Workshop - 192 entries