LumberJocks

Woodworking blog entries tagged with 'tutorial'

  • Advertise with us
View Brit's profile

The Humble Hand Brace - A Beginner's Guide to Restoring, Buying and Using #1: Part 1 - Restoring a Brace to 'Like New' Condition

08-15-2011 10:41 PM by Brit | 59 comments »

In a recent tool gloat, dakremer showed off three lovely braces he’d purchased and said “Now I just have to learn how to restore this kind of thing”. WayneC was first to congratulate him and then proceeded to drop me in it (only joking) by saying “Brit has lots of experience in restoring braces”. Later in the comments dakremer said he would love to restore at least one of them to like new condition. Always a sucker for punishment, I agreed to do a blog on restoring a hand brace and I’ve...

Read this entry »


View patron's profile

preparing wood #1: MILLING 101 , a TUTORIAL

03-08-2010 12:49 AM by patron | 58 comments »

here is the process called ’ milling ’ .i was asked to explain this in a PM , and did so ,but the written explanation was to confusing ,so i did this and took pictures and wrote this explanation .it was so well recieved , i was asked to share it with others , that may have questions too , but might feel ’ dumb ’ asking ,( there are no dumb questions ) , especially here on LJ’s so here goes .milling is taking rough or twisted/warped lumber and making straight and ...

Read this entry »


View GaryK's profile

I need help in deciding what to build next.

02-19-2011 01:35 AM by GaryK | 57 comments »

I am hoping that some of you can make some suggestions on what I should make next. Whatever I make I will do a blog on how I made it. If it’s really involved, maybe a multi part blog. Well, the house is already full of furniture so I can’t make anything big unless I get rid of something. (Very hard to do since I built most of it.) Here’s what I’m looking for: 1. Something I have never made before. 2. Hopefully something unique.3. Something that will expand my ...

Read this entry »


View CartersWhittling's profile

Workbench #9: Making Wooden Screws

10-08-2011 02:33 AM by CartersWhittling | 57 comments »

Hello. This is a video showing the process I go through to make wooden screws. I briefly try to explain how it is set up and show the jig making the screw. I will soon have a video on making wooden nuts aswell. I will eventually make a video showing how to make the tap and screw making jig and explain how to create the size of screw you want. I’m sure there are many other ways to make nuts and screws but this is how I do it and it works fairly well, the main downside being that I can ge...

Read this entry »


View patron's profile

tutorial #1: RIBBONS ANYONE ?

07-15-2012 03:59 AM by patron | 55 comments »

i been back to the shop more recentlymaking some giftsand in the process of making some accents for themthought you might like to know how to do it this is the ready parts to be used for thatand how i made them i start by selecting the woods that have some contrast to each otherand are different than the background they will be inall the same size and with double tape on both ends(make them wider and thicker than the finished partor the processes will eat up your wood) laying them on...

Read this entry »


View PurpLev's profile

Work(shop) in Progress #8: New Table Saw: Low Profile Riving Knife for Ridgid R4511

04-13-2009 03:51 AM by PurpLev | 53 comments »

So among the few shotcuts that were made by providing the R4511 at the market price was the fact that it only came with a splitter+integrated blade guard but no additional low profile riving knives (for non through cuts). for the price this saw comes at – one can’t complain, and the fact is- it does have a riving knife mount system which is a good base to start with. solution: homemade riving knife made out of 1/8” plate of 6063 aluminum: EDIT: If I’d do this again,...

Read this entry »


View McLeanVA's profile

Cutting Board: How To's #1: Zig Zag Cutting Board - How To:

10-04-2010 11:38 PM by McLeanVA | 50 comments »

For those of you who asked me for a tutorial on how to make the zig zag legless vegetable death table (cutting board), here is my best shot. I am far too impatient to take photos when I work, so I decided to illustrate the process using some good old Adobe PhotoShop. I hope you find this useful and informative. I will outline the process in 10 steps below. I have assumed that when viewing these steps that basic woodworking skills are familiar to you. If you have questions, or run into snag...

Read this entry »


View rivergirl's profile

SPOON, SCOOP, COFFEE or otherwise CLUB/Challenge

11-11-2010 03:46 PM by rivergirl | 50 comments »

HEAR YE, HEAR YE!! Yes, Virginia we now have definitive proof that cavemen did enjoy scooping coffee! In fact cromagnun man (and woman) were the precursor to modern day Starbucks. In response to my recent posting of a neanderthal period coffee scoop, that was presented alongside a lovely model crafted by my L/J friend Jerry W, it was suggested that we begin an archelogical study, a challenge or showcase if you will of scoops and spoons. Because it was my shamelessly (or was it shamefacedl...

Read this entry »


View Sheila Landry (scrollgirl)'s profile

Online Scroll Saw Class - Incredibly Fun Adventures in Scroll Sawing #3: Applying the Pattern for Scroll Sawing

07-15-2011 10:28 PM by Sheila Landry (scrollgirl) | 50 comments »

I hope everyone was able to find the supplies that I suggested in the last part. If anyone had any trouble, please let me know, either through a personal message or on the comment section here and between myself and the others here, we should be able to help you. We are now ready to apply our patterns to the wood in preparation for cutting. But first of all you need a pattern. I have made up a sheet of some simple shapes that you can use as a practice scroll saw pattern. Just click on ...

Read this entry »


View degoose's profile

How to make a endgrain tumbling block butcher block board!

08-12-2009 12:13 PM by degoose | 50 comments »

Hi guys ,, I had a request to make a tutorial with regards the endgrain Tumbling Block Design.First off,.., You need to decide the size of the blocks…. for this example I used 1” stock… Or something similar.. actually just over .. once dressed. Set the blade of the table saw to 60 degrees.. a bevel box makes this simpleI use the INCRA fence system so it is easy to rip bevels off side of the blade.Once the bevels are ripped measure the length of the bevel and move the f...

Read this entry »


« prev 1 2 3 4 5 ... 219 next »
2188 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase