Watch here a little wooden box to hold earring for my nieces
In this blog I am going to give you a how to on my metallic finish of copper patina and rust application on wood As you can see I started with a small vessel that has been hollowed. This vessel is about 5 inches in heigh. I only want to rust the top as I am going to copper patina the base. The rust paint is a paint from Michaels which is a hobby store here in the USA. The paint is very thick and contains metal flake. It is put on very heavy and allowed to dry. Here I have applied...
So I’ve turned some pawns out of yellow poplar to try to narrow down the look I want. I then realized I wanted to base my set off of a king so I’ve started on those. The first one looked terrible, but I think that I’ve got it. At least I hope so because I spent an hour on creating a template to duplicate this one. It is a shade over 4” and a base of about 1 3/4”. You may notice the jacked up finial on top. Well, I initally had it turned to where I could carve...
Well I just wanted to put out there that I sold my first bowl on etsy yesterday. Here is a link to my shop. I was excited because I didn’t know the person. Here is a pic of the bowl sold.
Sorry I have not been putting a lot of my projects on here lately but I’ve been doing alot with esty and I’m doing a new website it takes a lot of time. Here is a link to my esty shop if anyone would like to see what I’ve been up to. http://www.etsy.com/shop/JosephBealis
Been awhile since I posted anything! How’s everyone been? Work keeps me busy all the time anymore, but I do love it. Unfortunately it’s a very long drive, about 45 minutes to an hour in the morning, crawling along LA’s 405 and 101 freeways. Traffic ever since school started keeps it really busy until midnight, and with all the techy stuff I’m always working on, I tend to stick around at work until after 8PM, and often until 9 or 10, then the long drive home in heavy (b...
I mentioned my broken dryer in my last post. It’s not woodworking, but it’s ‘making,’ and I thought it might be of mild interest here. So a few months ago I heard a loud bang while doing laundry and soon realized the dryer was no longer spinning. The motor was running, but the belt had popped. Not knowing how to access anything, I must have spent an hour fighting it away from the wall and digging through internals, unscrewing panel after panel, hitting dead ends, be...
Just an update on this post. When I left off, it looked like this: I took a week’s hiatus – no motivation – and upon returning to the garage (last Sunday), I found this: Note it goes right to the pith, as every check I’ve seen in any log, branch, or twig in which I’ve noticed any checking does. This is why so many people remove the pith entirely from their blanks, and why pith-in end-grain turnings can be a bit of a craps shoot. Note that thi...
Two weeks ago, on a whim, I got home after work, sliced off a piece of smaller branch from my large pile of smaller Jacaranda branches (~2.5”-3” dia.), and turned a bark-rimmed goblet. Sorry for the gratuitous lighting :) Let’s fly into it… The inside is smooth, and today, 15 days of air-drying on my dining room table later, it still has no checks, even around the pith inside, or on the bottom of the base! Here’s my hand for some b...
Well, I tried out the tools I got from mom for my birthday recently. Of note: 1) My 1/2” Sorby Spindlemaster was not a good indicator of how the 3/4” and 1” behave. I’ve been using the 1/2” however I liked, never reading up on how to use it, nor watching any videos. I recently watched one and thought “Huh, I’ve been using it entirely wrong.” I’ve been holding it flat, and using a combination of things with both hands and the tool rest t...
- My Journey As A Creative Designer - Woodworking and Beyond - 1736 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 98 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 78 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1761 entries
- frank - 417 entries
- dbhost - 410 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 303 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 239 entries
- Betsy - 228 entries
- robscastle - 216 entries
- stefang - 215 entries
- Stevinmarin - 212 entries
- Dave Rutan - 210 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- Rustic - 190 entries