Body done, wedge done, plane iron done. If you are anything like me, eagerness to see some shavings has replaced all other desires at this stage! With a bit of luck, paper thin shavings will be curling out of the mouth. Isn’t it great! If not, don’t despair…. LET’S FINE TUNE: 1. True the plane sole. This is done with the blade in place but well away from the mouth and the wedge set up tightly as it would be in use. Why? With the wedge set, our plane is in “tension”. The wood actuall...
How does a dog get the LAST bit of water out of his bowl ? With a half-lap :-) Spent too much time figuring out how to get Hurricane Walter to spew less dust, or—at least—how I could capture the dust he spews. Shroud seemed like the way to go. So …. with leftover plywood from the construction of the ol’ ChupaCaja, I made me a dust collection box. ID is about 8” wide x 8” deep x 8” tall. The joinery is (IS it called this ?) half-lap (...
I brought this magnificent (note the dripping sarcasm) piece of machinery home with me during one of my flea market outings. This is a late model Stanley #4. Its painted Blue, made in the US, has a painted cap, a shorter iron than vintage, and no toe on the tote. The knob and tote is painted black, it has an aluminum frog and a pretty cheezy lateral adjuster. Now….why anyone but someone with a sickness for hand planes like me would buy this plane is a little beyond my understanding, ...
“Does it run?”, I asked the goatee-wearing college kid working the estate sale. “I don’t know, let’s plug it in and see.” So we did. And it ran. But it made a loud rumbling sound. “Could be the bearings,” goatee-boy said. “How much you asking for it?” “Make me an offer.” “25 bucks work for you?” “Sold,” says he. So I borrowed a dolly, backed up my Mini Cooper to the garage—you’d be surpris...
Mine was about 7 years ago, I still wasn’t doing anything woodworking like, and we had moved to a new apartment where the bathroom door wouldn’t close since it was too tall and would hit the jamb (well- actually we mounted one of those over-the-door-hanger thingies which made things that way) so, my wife suggested we get a handplane to fit the door to the (now lower) opening. I have never worked with a handplane before , and the closest thing I’ve ever held in my hand was...
I have ordered 3 planes, so far, that were used. Of those three, only one didn’t arrive with the iron almost fully extended. I don’t see planes at garage sales any more, but when I did, I noticed the same thing. While the blade extension might seem like the obvious problem, one of the real underlying issues here is that the cap iron is not set right. The cap iron is another item on the plane that I think is overlooked, yet is an essential piece to successful plane operation. Of...
Well, over the weekend, I was only able to do limited work on my boxes. You see, I discovered the reason for my “clamping issues” on my lever-action boxes… My miter saw is out of adjustment! My 45’ angles were NOT 45’! So I took a 2×4, jointed it then planed it, then spent the next hour chopping the h311 out of it, adjusting the blade after every chop, until it was giving me perfectly accurate 45’ angles. I also adjusted it for 90’ angles. ...
I have my own blog, and before I discovered the excellence that is Lumberjocks, I started posting my woodworking adventures there. Fortunately, I only got one post up there before I signed up at LJ. However, I’m going to leave that post where it is, so I figured I’d drop a pointer to it here: Jumping Right In. Maybe not the ideal solution, but c’est la vie .
Had a lot of fun producing my video on the setup of my first Japanese plane (‘Kanna’). It’s tempting to leave the entire process in, and much easier too, but for the sake of viewer sanity I cut out periods of sole and bed scraping, and blade lapping, etc. just leaving enough to show the methods. It still runs to twenty minutes, but hopefully anyone interested will stick with it to see the results! I can’t figure out how to embed it here on the page, but you can w...
Just finished setting up my first Kanna. I like it – why did I wait so long to get one! I’ve filmed my setup procedure, which was based on various articles and videos online (big credit to fellow LJ Mafe, and his blog post), and will be posting a video to YouTube in the near future. I found the experience very calming, pretty easy, and quite successful – 0.04mm full width shavings (holding together) against the grain with virtually no tear out. Clearly I can improv...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 105 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 418 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 245 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- A Slice of Wood Workshop - 190 entries