Bit by bit and either with a palm sander or by hand, the table has been sanded to a nice smooth finish. 180 grit was the last grit I used and I felt that is sufficient for this project. I am quite happy with the progress and the way it looks. Now for the next step and looking for a bit of advice. I have researched as much as I can about applying a epoxy bar finish. I think it was on a youtube post that someone prefinished their table with tung oil. I am thinking of doing the same thing ...
It is not always nice to have to stop a project because it is bed time, but it does give you a better perspective view the next morning. Before having this sharp object in your project, I figured I might as well do most of the shaping before the glue up. What I am not sure of is how big to make the handle. It seem too big, but I’ll make an other one after this anyway. I used the Elmer’s Epoxy. I hope this stuff will be strong enough t hold this together. Remember this is ...
Oil-based finishes are typically the first type of finish we confront as woodworkers, be it straight oil or a can polyurethane. Although they are all derived from oil, these finishes can vary widely in terms of application method, durability, and maintenance. The key to understanding these finishes is to understand their ingredients. With that foundation in your tool belt, you can start looking at ingredients lists instead of brand names and labels, and you’ll know exactly what to ex...
Wood Workin’ Character ....and so here we arrive at this morning of a new day, just as I also hope that none of us are in mourning this morning…. ”What is my new day all about, what is your new day all about and how does this new day morning, contribute to the spirit of wood, that begs to be heard in the creation of ‘wood art’, by the hands of the woodworking community?” Wow….and that one question, (or one of many questions within a question)...
Since I don’t have one of those fancy japanese saw blades with no set, I sanded the keys off with 100 grit (being careful to stop before touching the box), then taking the rest off with 150 grit and finishing the entire box with 220. Of course, I decided to take it one step further, and I went over it again very gently with 320 grit. I then did a quick vacuuming of my work area, and got things prepared. The end of this pair of boxes is now in sight. Here you can see the two boxes lai...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 105 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 418 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 245 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- A Slice of Wood Workshop - 190 entries