Okay, here’s one of the most useful jigs that I’ve ever made. And if I lost i tomorrow, I could build another in about fifteen minutes. I’m not going to include any dimensions as you should make one to fit your own situation. I made this up obviously with scraps. If I made it out of anything else, it wouldn’t work any better. When I build things there’s always some small parts in need of a little fitting. Viola! I frequently use this #7 r...
It has been a while but I finally finished the living room.The last of the trim has been installed. The baseboard proved to be more challenging than I had hoped for.The house over the last 100+ years has settled so every bit had to be scribed and planed to fit. There are still pieces to build for the room but at least it is finished. I plan on adding a period correct light to finish it off. thanks for looking. Greg Here is the finished product finally…....................
I wanted to tell a little more about my experience with crafting my own crown molding, and share a couple of lessons I learned along the way. Previously, I showed how I formed and sanded the profile on the last blog of this topic, and so today I thought I would complete the task by showing the installation of the molding, and a few “gems” I discovered along the way. First off, I made very sure that my cabinet that I am hanging this crown molding on was as perfectly square on...
The last two months or so, the shop has been a mess. Partly this is due to not having a place to put all of my lumber but the bigger part is I have had no place to put the larger equipment. Recently in one of the woodworking magazines they built a shop cabinet that housed the same type equipment I was trying to organize. They built it with spruce and peg board. I had some left over melamine (melamine that just happened to match all of the other cabinets in the shop) so I went to work with a d...
Okay, added a wall to define my shop space for heating, etc. and included a pair of pocket doors. They’re framed but need trim. Enter some spaulted (stained, really), flat-sawn sycamore. Dressed the edges and faces, needed something to dress them up a bit. How about a bead? First the flat stock, ready to go. With the #45 set up and ready, an early key is to take multiple, shallow passes. Here’s a scratch pass: Start on the end of the piece, taking multiple passes ...
...alas, only on local cable, but a good start.. Our local cable television company has a local interest tv ‘magazine’ show. They shot a video clip of the Kerry-All Pouches Friday at a local building supply dealer. This dealer has been instrumental in helping me launch the various versions of the Pouch, including the original Plywood Pouch, the long and narrow Trim Pouch as well as an 8-foot Drywall Pouch, or cover and a 12-foot model. They’ve tried prototypes and given m...
It’s part 4 of the basic flower box. Man, when is this stupid flower thing going to end? Oh yeah, this is the end. Finally we can be done with digging in the dirt and smelling sweet smells that get into your clothes. Oh cripe i’m a girlie guy! I hate my life. PLus there will be new segmets to the show in the near future, with new characters. Stay tuned.Visit woodchoppintime.comor become a subscriber at www.youtube.com/bigchopperoo
The PlanSave the plaster, the upper cabinets, all millwork, and the windows (is that millwork). The douglas fir cabinets had been refaced in the long past. Could it be removed? Before The kitchen before… Upper cabinets are original with refacing and paint.. The evil laundry porch. Close up on laundry sink. Nice huh? Under the sink. That is my poor man’s possum proofin. My first homemade shelf. Good times. If I had a hammer… Demolition Time!!!! I demo ...
Disclaimer: This blog follows my Magen David Board that is already finished and posted here Once everything was glued up into a single slab, it was time to plane it flat and parallel. one of the strips I jointed happen (don’t ask me how…lol) to be jointed off square, throwing the last 4-5 strips in the glueup off flat (mostly flat). I was tired at this point, and just figured I’m not going to rejoint it, but will pay the price and plane it all down at the cost of having a...
TrimChests and wardrobes benefit greatly from the added visual detail of trim applied at the top of the case. Watch this video to see how I cut the cove for the trim on my Dr. White’s chest. Trim after application and prior to final sanding. Out-of-focus shot of the temporary fence set-up I used to make the cove cut. Be sure that your clamps have a good hold. Often, the areas under or near the edge of the table saw are difficult to attain a good clamp hold. NOTE: Years ago,...
- My Journey As A Creative Designer - Woodworking and Beyond - 1792 parts
- Extremely Average - 324 parts
- Toy costruction - 115 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Woodworking on a Half-Shoestring - 82 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1817 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 241 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 210 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries