I am working on both tutorials for a couple of reasons, to correct many areas that were unclear and to add in all the fixes I made in the comments sections. Some of the pictures I used were no longer showing up due to a glitch on the website I had them stored at and the tutorial made little sense without them. So I decided the text needed redoing also. I am very busy right now, but hope to get around to it soon.Stay tuned.Andy
here is the process called ’ milling ’ .i was asked to explain this in a PM , and did so ,but the written explanation was to confusing ,so i did this and took pictures and wrote this explanation .it was so well recieved , i was asked to share it with others , that may have questions too , but might feel ’ dumb ’ asking ,( there are no dumb questions ) , especially here on LJ’s so here goes .milling is taking rough or twisted/warped lumber and making straight and ...
i been back to the shop more recentlymaking some giftsand in the process of making some accents for themthought you might like to know how to do it this is the ready parts to be used for thatand how i made them i start by selecting the woods that have some contrast to each otherand are different than the background they will be inall the same size and with double tape on both ends(make them wider and thicker than the finished partor the processes will eat up your wood) laying them on...
i have had this grizzly 20” planer(it weights 850 lbs)siting on this dirt pile for 11 yearscovered with inner tube rubberhad no place to put it till now i have a deck that is semi-coveredso i made a 3 layer 3/4” ply laminated trolley for itwith 4 swivel casters each rated to 900 lbsall steel (had to order them $100) here is where it sat on a pile of dirtthat i could back the truck up to thenand cut a ledge in the dirtand rolled the monster on 3/4” clamp pipesonto the ledg...
LATER EDIT – HERE IS A LINK TO THE FIRST START-UP : THE POSTS – http://lumberjocks.com/patron/blog/21811 last time we left off here and since i got back from that trip http://lumberjocks.com/topics/29386 here is the progress and the build first the wood arrived tuesday30 2 1/4”x11 7/8”x30’ TGI’sand 35 sheets of 3/4”x4×8 T&G OSBand 3 3/4”x4’x8’ cdx ply for the skirting and this much got done by dark that nig...
Hi Everyone, this is my first time trying to do a blog. So please bear with me, I’ll do my best!I have had a lot of request to do a blog about my rings, I do 2 kinds of rings. The Lamination style and the Bentwood style, this blog is on the Lamination style. This ring is made out of Cocobolo, Brass and has a Mother- of-Pearl inlay. I start out with 3 thin squares of Cocobolo, about a 1.5”, I have a thin sheet of brass that I cut about the same size as the wood. I lay them out to o...
i have been in my home for 10 1/2 years now ,and early on had to choose between a house ,and a well .i had to chose to build the house , as it was beginning winter , and i had no place to live .i hauled water first in milk bottles , and then 5 gallon plastic jugs .i setup all the plumbing first ,got water heater , shower , vanity , toilet , and sink .everything was ready , but i had no water ,my friends would laugh , i even had a clothes washer .i bathed at the neighbors , and did laundry in ...
after i posted this box , which took a total of about 5 hours in time , but two days , because i didn’t have the handle and clasp i got enough comments to post a tutorial on it’s building process , so here goes . thanks for looking . this is the finished box.i start with the wood for the whole box straight and milled to thickness all the same ,the top and bottom are wider here ,and the length of the body must be long enough ,to take the width into account for the ends .i cu...
throughout my career as a woodworker/carpenteri have hung many new doors to existing jambsthe hinge placement its criticalas i must leave the existing hinges in the jamband transfer that to the door the hinges are usually different sizeswith different corner detailsand offset to different dimensionsdepending on the pre-built standardsof any given door maker(they are never the same just visually close) over the years i have come to know and struggle with these diferences you have some...
now i am glueing down the inlay , using west epoxy .the problem being that i don’t like puting things ,( like bricks , paint cans , bucket s of sand or water ) ,and i dont have enough wood to make cauls .so back to an old trick i learned in the fiberglass boating world . as i think in a vacuum , it’s only natural to work in one too ? so here it is ...a vacuum is not pressure , it is the absence of pressure .when they went into space , it wasn’t like going down deep in ...
- My Journey As A Scroll Saw Pattern Designer - 1186 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- As The Lathe Turns - 67 parts
- Workshop Development - 65 parts
- Sheila Landry (scrollgirl) - 1208 entries
- frank - 417 entries
- degoose - 387 entries
- dbhost - 331 entries
- Ecocandle - 325 entries
- MsDebbieP - 300 entries
- Martin Sojka - 297 entries
- Karson - 293 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- mafe - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- scottb - 144 entries