So I went to my local salvage/resale store today looking for anything cool they might have up in the tool section. After rummaging through all the junk I found a complete postwar Stanley #4 bench plane for $3.00, some halfway decent rasps for $0.25 each, and few other odds and ends. As I was leaving I decided to dig through all the hand saws they had jammed in an old slop sink. After going through about 30 of them I came across an early Disston. I looked at it for a little while and the handl...
Just in time for the Olympics, we’re now having a heat wave, so I decided to sharpen Big Joe. This isn’t the first time I’ve tried to sharpen it. When I went to Paul Sellers’ saw sharpening workshop last December, I took it with me and tried to sharpen it rip. It looks like I know what I’m doing in that photo doesn’t it? Au contraire mon ami. I made a right pig’s ear of it. You’ve heard of progressive filing haven’t you? ...
Just wanted to post a quick video to show a Disston D8 that I sharpened today as a 7ppi rip saw with 5 degrees of rake. I’ve also included the Disston D8 from my last post which was filed 8ppi crosscut with 12 degrees of rake and 20 degrees of fleam.
I managed to grab a few hours when it wasn’t raining and decided to sharpen Big Joe, the first of my crosscut backsaws. I got ¾ of the way through filing in new teeth and my file gave out. I’ve ordered some more files which should be here early next week, so I’ll return to Big Joe in a future post. I didn’t want to waste the day however, so I decided to sharpen a handsaw instead – a first for me. Some months ago, I restored a couple of 26” Disston D8s. This one is 8PPI (points per in...
I took a Woodcraft class last year called Hand Tool Basics and Sharpening. Took me through sharpening cabinet scrapers, chisels, hand planes and saws. A little bit about how to use them, but nothing significant. Loved the class, and I have to say I’m very happy with the sharpness of the chisels and plane blades I have done on my own since that class. Today I needed to cut up some MDF for a shooting board. Not knowing if MDF is good or bad for saws, I decided I didn’t want to ri...
- My Journey As A Creative Designer - Woodworking and Beyond - 1793 parts
- Extremely Average - 324 parts
- Toy costruction - 116 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Woodworking on a Half-Shoestring - 82 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1818 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 242 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 211 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries