So after much research and debates, I have finally charged the card, and 2 days later the delivery arrived with the new saw in the box (I opted to have it delivered from the store as opposed to pick it up myself – at 450lbs, I simply wouldn’t be able to unload it myself) Delivery from HD was swift and smooth, positive and friendly guy stop at my place saturday morning, and helped me position the box in my garage – I couldn’t be happier (took 5 minutes, 4.5 of those was...
Not much done today, had time to install the casters. had to go the lowes for some lag bolts (5/16) as the casters did not come with it. I found the casters on eBay for a fantastic price. it’s sold by SES Casters which are here in Massachusetts. total price was ~26 including shipping. they may not be red and shiny – but they are soft, heavy duty, and work fantastic! I highly recommend this seller by any means. I installed 2 swivel casters on the front of the table, and 2 non...
I was working on fitting the skirt to the front of the bench, and it looks fantastic. in order to get to the final dimensions of 30” width of the top, I’m missing 1/8” extra material between the benchtop and the skirt to fill in the gap, while keeping the skirt flush with the legs fronts. so far so good. while fitting the skirt to the legs, I noticed that the gap on the left side of the bench is larger than the right side… a quick reach to the tape measure confirmed...
I mentioned it in the previous post and as I was working on the drawers I had the main carcass take the finish to make use of time. Mahogany much like Oak has large open pores. My finishing goal was more for practice than necessity, but I was aiming for an antique polished look – shiny outside. I knew I would have to fill in those pores if I want an even polished surface. So my plan was to start with a filler coat which I tried to concoct using dewaxed shellac and mahogany sanding sa...
I just finished a video that details the construction of a neat little box I made for my wife as an anniversary gift. This box has some unique features that make it special. Check out the video and leave a comment on the site and let me know what you think of the project. The video can be accessed here:http://www.eaglelakewoodworking.com/post/Keepsake-Box-Cocobolo.aspx I actually made two of this style box (one as prototype). Here’s a link to the photo galleries of each box:...
There’s an article, by the well-known Christopher Schwarz, that tells how to make a workbench for about $175.00. I like that idea ;-) He raves about SYP, but … not much of that in my neighborhood, so …. I went with the dimensional Doug Fir, from the Depot. I’m working on the base, right now, but … here’s the top … before being trimmed to length: Got his recommended vise, bench dogs, and Wonder Dog, from Lee Valley. The top will dress ...
OK. I caved in and bought an Incra Insert for the router table after they posted it back in stock. It’s the 3/8” phenolic plate that is their ‘old’ design. the opening for the router is 3 3/8” as opposed to the new Aluminum plate which are 3 5/8”. also it’s not as mechanical capable as the aluminum plates, but for $35 it’s within my budget. and still a very good plate. what I really like about the Incras is their MagnaLock plate inserts which sn...
finally getting to work on the actual bowling alley part of the “bowling alley workbench”, although I really found Damian’s comment on a previous installment entertaining, and might refer to it from now as the “Alley Workbench”...lol. The top as can be seen in the sketchup model is made of 6 different components: Main Slab (nails and all), Dog holes strip, buffer strip, 2 skirts (front and back) and a breadboard End Cap. In reality this will change slightly...
Didn’t have much shoptime lately, which made me try to squeeze every moment I got to try and make the most of it, which lead to rushing, which lead to screw up – but I’ll write more about that in a following installment and leave this one a bit more on the positive side. Last time I ran into the issue of having a not-square top part to work with. I fixed that by routing the edge at a 0.1 degree angle to straighten the front of the slab and make it parallel to the front 2 ...
and I mean literally – we’ve had a snow storm here, and the garage is covered with more than a foot of snow. It was blazing outside and the high winds were blowing snow all over the place. my garage is unheated, but neither of those stopped me from making the most I could with an open window of time I got this weekend. I caved in, and ordered an Incra router plate for the top when they just posted the phenolic version on sale for $35 (they had a 10% off last week). I really ...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 107 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 420 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 214 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 194 entries
- A Slice of Wood Workshop - 190 entries