A Scrimshaw Art Journey: A Lumberjock’s “Short Version” of the Techniques for Decorating a Powder Horn by: Mark A. DeCouwww.decoustudio.com (This writing, photos, and artwork are protected by copyright by M.A. DeCou 2007-2010, all rights reserved, please ask permission before using any part or component.) =============================== UPDATE 9-25-2012:This past summer I had four students at the John C. Campbell Folk School class on Powder Horn Building and Scr...
I’ve had a couple of 12-14 hour workdays this week and have not had the opportunities for restoring any planes. I decided to take a little time this evening to discuss items that will be needed for the restoration process. The basis for this list comes from the Ernie Conover Video on Reclaiming flea market planes. Hopefully, he will update this video and release on DVD. The list is as follows: Lap Plate – used to lap the sole and sides of a plane- Plastic Laminate – ...
The Humble Hand Brace - A Beginner's Guide to Restoring, Buying and Using #8: Part 8 - Tips and Tricks on Using a Hand Brace
Sorry it has taken me so long to post the final part to this blog series. Life just gets in the way sometimes. However, here it is and I hope you enjoy it. In this episode I wanted to look at using a hand brace and explore some of the so called hints and tips out there to see if they really are useful. I’ll also show you how to get in touch with your inner level. I’m assuming you’ve sharpened your auger bits like I showed you in the last episode. A sharp auger bit is paramount for drilling...
Based on an article by James Thompson I found on OldToolsShop.com. I though I woud try using Citric Acid for rust removal. The article can be found at the following link. http://www.oldtoolsshop.com/z_pdf/restore/RemovingRust-CitricAcid-ne.pdf Citric acid is used in food processing and seems to do a good job removing rust. I checked the local yellow pages and found a local beer home brewing store. I called them and confirmed that I could purchase citric acid for $5 per pound. I made...
This is a list of links that I will maintain that are related to handplanes. This is primarily intended for my own use, but feel free to add to the list if you have some favorites. Manufactures Anderson Planes – Handmade Infill style planes Brese Plane – Handmade planes by Ron Brese. Also has blades for making planes. Classic planes – Infill plane manufacture Galoot Tools – High Quality Handcrafted Plane Blades and Chisels. Holtey – Infill...
I decided that it’s time to tackle the knife handle I’ve procrastinated on. We have had a nice kitchen knife for years that really felt good in the hand, held its edge, and sliced very well. However, the handle rotted away and I decided to do my first handle replacement. I had a perfect sized piece of canarywood left over from box construction that will become the new knife handle. One surprise (see picture) was that the knife tang was a lot smaller that I anticipated. The blade top align...
I picked up this DeWalt Radial Arm Saw (RAS) for about $50 from a nice older man in southern Massachusettes. It was his father’s and had been in his family since it was purchased new in 1960. Here is a picture of it “in the wild” ( as I found it). I took it home and began cleaning it up, lubricating moving parts, and then gave it a nice coat of hammered enamel paint. I constructed a “Mr. Sawdust” style table for it and calibrated all of the alignmen...
I had some good progress on the top today. it actually started a couple of days ago when I went ahead, cleaned up the buffer strip, and main top, and glued them up together, I also milled the end cap part (which is on top of the clamps in the photo): I also ground down one of the corner of the Lee-Valley Tailvise Nut so that I’ll be able to install the vise higher up and the nut will have less interference with the table top: I’m not a machinist, nor work with metal much (al...
After a long week at work, I decided it was time to start the process of restoring my bench planes. I have been collecting them for a while with the intent of getting a good set of operational hand planes. I am hoping I will get a good set of usable planes at a reasonable cost. Currently, I have the following size planes set aside for restoration: #3, #4, #4 1/2, #605, #5 1/2, #6, #7 and #8. All of these are Stanley except for the #8 which is a Sargent VBM 428. The #4 1/2 and t...
Aimed at those new to saw sharpening, this instructional video is 2 1/4 hours long and covers the theory, the tools and the practice of sharpening western saws. You get to look over my shoulder as I sharpen four saws – two backsaws and two hand saws. I’ll explain the saw sharpening process and how you apply it to different scenarios. I really hope you find it useful. As to the production quality, I’ve done the best I could. I had to record it outside, so there is a bi...
- My Journey As A Scroll Saw Pattern Designer - 1428 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 92 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1452 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 230 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 197 entries
- shipwright - 192 entries
- Rustic - 186 entries
- Chris Davis - 183 entries
- stefang - 179 entries
- BritBoxmaker - 169 entries
- PurpLev - 163 entries