Here are photos of the tools i have thus far. Any advice on what to get please help me out, keeping in mind i only use human-powered hand tools. I plan to get more planes, files, rasps, a coping saw, a cabinet scraper, a drawknife, a spokeshave, a bevel, and a crosscut saw. If you know how to make any of these i’d appreciate the help because making the tools is a top priority, second is buying them. If i left any tools that i have out it’s probly something small like bits and, suc...
Since I cannot at this moment show my workshop as I am in search of a space, even though I have bought the machines and still in boxes. What I can do is to show the photos of my machines, some of the tools & accessories, don’t have photos for everything. <div></div>
Just playing around in the shop and came accross these planes. I made them a couple years ago, and really enjoyed it. Nothing too fancy, and the basic plans came from a book on making hand planes. They are a pleasure to use as the shavings come peeling through the throat opening. That nice whoosh sound that only planes make, and shavings thin enough to read through! And a polished surface that’s left behind. So much satisfaction in using them, knowing you made them. ...
Everyone’s going to hate me for this, but I just fell – not literally – into a lot of new Robert Sorby turning tools. The 18th (3 days ago) was my 32 birthday (for you programmers, that’s 100000 in binary – I no longer fit in 5 bits!). Mom sent me a box of Rockler goodies from my wishlist. In typical (for my mom) fashion, she overdid the gift-giving. She’s always been very supportive of my endeavors. Thanks, mom! I’ll have to make her several nice thi...
I want to apologize if my blog has been the most depressing so far. This week my wife lost her grandmother. If you have been following my posts this past year, we have seen a lot of loss in friends and family. She is in a better place, which in and of itself is a relief. On to some good news. I have spent the past 6 months working on a project for a friend of mine. His office was due for some major updates to it’s network and server. This project has taken a lot out of me, both ...
Here’s a couple of pictures of just a few from a box of tools that have just been donated to the museum where I do voluntary work. They’re mostly in cast brass. My thoughts were that they’re for decorative plaster work. Can anyone confirm? Any other ideas?Tiles are 6” to give a guide as to sizes.
A Scrimshaw Art Journey: A Lumberjock’s “Short Version” of the Techniques for Decorating a Powder Horn by: Mark A. DeCouwww.decoustudio.com (This writing, photos, and artwork are protected by copyright by M.A. DeCou 2007-2010, all rights reserved, please ask permission before using any part or component.) =============================== UPDATE 9-25-2012:This past summer I had four students at the John C. Campbell Folk School class on Powder Horn Building and Scr...
Yesterday, I took every tool that was in my main tool chest out of the box and cleaned and vacuumed out the box. While I was at it I laid my tools out on the work bench and cleaned and inspected them and took some of the bigger Stanley planes apart one at a time and cleaned all the parts. The iron in three of the planes needed sharpening so I did that before I reassembled them. I then put a few of the tools and put them in other drawers instead and put some other tools with these because this...
I had some good progress on the top today. it actually started a couple of days ago when I went ahead, cleaned up the buffer strip, and main top, and glued them up together, I also milled the end cap part (which is on top of the clamps in the photo): I also ground down one of the corner of the Lee-Valley Tailvise Nut so that I’ll be able to install the vise higher up and the nut will have less interference with the table top: I’m not a machinist, nor work with metal ...
So as I have mentioned in previous blogs, I have been studying and collecting Japanese hand tools. And my favorite book which has inspired the collection is JAPANESE WOODWORKING TOOLS by Toshio Odate. In this book there is a section on saws (Nokogiri) where Odate proudly displays a favorite in his collection: This saw was a rip saw used to mill large stock. The wide blade was designed to keep the cut straight in very thick lumber. It was used by the mighty kobiki-shokunin (s...
- My Journey As A Scroll Saw Pattern Designer - 1042 parts
- Extremely Average - 325 parts
- Daily Update - 87 parts
- A journey into the workshop. - 85 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Just for Fun... - 72 parts
- The Craftsman's Path - 67 parts
- Workshop Development - 64 parts
- 52 Weeks - 52 parts
- Sheila Landry (scrollgirl) - 1064 entries
- frank - 417 entries
- degoose - 384 entries
- Ecocandle - 326 entries
- dbhost - 318 entries
- Martin Sojka - 294 entries
- Karson - 288 entries
- MsDebbieP - 283 entries
- Betsy - 221 entries
- William - 213 entries
- Gary Fixler - 204 entries
- Stevinmarin - 197 entries
- mafe - 188 entries
- Chris Davis - 183 entries
- Todd A. Clippinger - 182 entries
- Rustic - 182 entries
- PurpLev - 159 entries
- BritBoxmaker - 146 entries
- scottb - 144 entries
- kosta - 144 entries