Low angel shoulder planeBecause it’s fun…. Before you start reading I want to tell that I finally managed to make it run!It was giving me a headache, but once I found out the problem it was right on. Here is a video showing it in action. But I will blog a improved version also in this blog serie. Not so long ago I followed a class here on LJ with Stefang where we build a bucket, part of this project was to make a convex hand plane (Krenov style). So what have this...
This is a list of links that I will maintain that are related to handplanes. This is primarily intended for my own use, but feel free to add to the list if you have some favorites. Manufactures Anderson Planes – Handmade Infill style planes Brese Plane – Handmade planes by Ron Brese. Also has blades for making planes. Classic planes – Infill plane manufacture Galoot Tools – High Quality Handcrafted Plane Blades and Chisels. Holtey – Infill...
Hello to all and all are Welcome, Intro: Hi, my name is Kory Kiker and a couple of weeks ago Ms. Debbie contacted me about conducting an online class for those interested in learning the art of intarsia. I was very excited about the chance to share a few things I have learned in the last three years of doing intarsia art. Before intarsia I did a lot of wood carving so I hope this helps give each project more depth and definition. I will tell you now that most of the things I’ve lear...
Overview: If you are going to make boxes there is no substitute for good band clamps. They pull all eight joint cuts together and tend to average out any cuts that are slightly off. I use two clamps on each box. They are expensive to buy, but cheap if you make your own. When in use, they look like this. These are really cranked down to pull all the joints tight. (A big thanks to Derrick who patiently helped me picture each step in this process.) Hint: To make this a quick read j...
Low angel shoulder planeDrawings Analysis and Documentation… I promised to post a set of drawings for this project, normally I will not do this, but due to the fact I was spending the time drawing it to figure it out I decided to make a few drawings to help others build.(And no one just do that, it took 6-8 hours of work, and 8 hours of building and thinking, so just thinking of the fact that I should receive 75 dollar from a woodworking magazine and be happy makes me laugh it would ...
In Feburary 2011, I broke my right leg and ended up having to deal with an extend stay in the hospital and time away from work. I was given an eReader as a get well gift and have been using it to kill the time. One of the things I found is that many classic woodworking books are available in electronic format for free. Many of these come from Google Books. You can read these books on-line using your web browser and down load them to your computer and save them there if you like. If yo...
Low angel shoulder planeMaking a blade from another plane iron. This is the second part of the blog, in last part the plane body was made. This is where we will end, Div’s shoulder plane on top, then mine and finally what this part is about; the plane iron. Since I have a handful of block plane irons I got for next to nothing, I will ‘kill’ one of these.Measure the width of your shoulder plane and add a little for later tuning (I added 1mm).Draw this on your plane ...
So in the spirit of getting everyone in the shop and cutting up some wood I decided to post up a measured drawing of a 3/4” wooden rabbet plane in the 18th century style. It is all wood with the exception of the blade which is easily gotten from Lie-Nielsen here. It features a conical escapement and some simple embellishments that a hand plane, chisel, and #7 sweep gouge can handle. The plans are basic with a few things that can be easily changed if you like. Such as the bed angle...
After seeing shipwright’s nifty wooden box hinge technique , I knew I had to try it myself. I’m not sure if it’s been attempted on this large a scale, but I’m happy with how it came out. The only change I made to the original technique was putting the grooves on the face of the board instead of the edge, that way the somewhat-unsightly filled groove would be hidden from view on the outside of the tool chest. Here is the initial setup with the grooves still open: ...
Sometimes you need long round parts made from wood. Prior to the 19th century, specially made wooden dowels often served where nails, screws and bolts are used today. For instance, in barn building and shipbuilding, ‘trunnels’ were used to fasten timbers together and planks to a ships ribs. Outside of lacking the strength of of metal, trunnels are not affected by electrolysis and do not rust, important considerations in ships – although of course they can eventually rot. The word ‘trunn...
- My Journey As A Scroll Saw Pattern Designer - 1580 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1605 entries
- frank - 417 entries
- degoose - 396 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 278 entries
- William - 258 entries
- Betsy - 221 entries
- shipwright - 213 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 197 entries
- Rustic - 188 entries
- BritBoxmaker - 184 entries
- Chris Davis - 183 entries
- Smitty_Cabinetshop - 176 entries