Jamies tool cabineta happy monkey in Jamies work shop. As some of you read I spend ten wonderful days in Scotland.Ten days that filled my heart, opened my mind and gave me a deep inner peace.Yes I was with Buddhists, but no, I was not sitting on top of a mountain in Lotus.I was with the most wonderful people, especially Jamie and Shirley who had opened their doors for me.I was meditating and even listening to Zen sounds and smell of heaven.The meditation was done in the morning after break...
Tool tote travel – teasera learning travel in tools and techniques Ok, I have talked about this before in the my first dovetails blog…The project is a tool tote, a mix of pine, and a branch from the forest! The challenge for me are to make all the processes, with both power (modern), and hand tools (old), to compare the difference, and to get on a travel in learning, both for my limits, and for what I can do that I thought was not possible.Here comes a few photos of the ...
Tool tote travela learning travel in tools and techniques. Yes some of you will say: ‘come on Mad(s), we heard about this, and you will never get done with those dovetails’.And I have to admit: ‘I have been a chicken when it comes to dovetails’. The project:The project is a tool tote or tool box (many opinions on the name), a mix of some wonderful pine wood boards from an old closet, and a branch from the forest! Here the design I did, a simple but ‘hopefully’ long, slim and elegant too...
Tool tote travel 3finger joints on a template / jig This is third part of the tool tote travel. Now I have cut dovetails by hand, so it’s time to play with machines again…This time some finger joints, since it’s a learning experience. I bought some years ago a router template for finger joints, and half blind dovetails.I paid 100$ on a sale and never opened the box… So now it was time! I found a 10 mm router bit as the set needed, and made a test cut on some plywood… O...
Japanese tool trayfor the new toolbox To complete the setup for working with Japanese tools I wanted a little tool tray that I could use to hold and carry tools while working, especially to keep the chisels off the ground. I decided it should be made so it could be stored and transported in the toolbox when not in use, that it should be made with the same joinery as the drawer and again no hardware.For the beauty and the joy of the eye I wanted a handle made of a branch like I have on m...
Tool tote travelglue up and details This is second part of the tool tote travel. Time for glue up.Table covered, water, PU glue, brush and gloves. Applying water on the joints, so the glue will work, and expand as wanted.Then the glue, and the rest is a just a puzzle, where you don’t want to use your camera, since you forgot to wear the gloves, and had glue all over… So here we are with clean fingers, and a clamped up tool tote.It’s important that you have remembered t...
Here I’m gluing very thin angled strips to the corners to correct a slight dimensional problem. ————————————————————————————— Here is the sanding setup to help with dust… Sanded all pieces of the Tool Tote… ... almost ready to start Finishing! Stay tuned… for more to come…
Well no rest for the wicked…..or wood obsessed…lol. My name is Joe and …....I have a shavings, saw, plane…..ahhhh you name it….it’s a great problem to have….right?.....lol Back at the shop and on the job of coming up with a project that I think will be fun to work with. I was thinking since I have been very fortunate to find all kinds of cool old handtools maybe I could build a project that might include some of the favorites that would make up ...
Better late than Never… OK, it’s time for the Finishing part! Finally!! 1. I gave ALL Parts a few coats of BLO (Boiled Linseed Oil as from Home D). This took a little time because I had to wait 2-4 days after each coat to be sure it cured good before putting another coat on them. 2. I wanted to give just the Bottom piece, on the Lettering side, more protection because it would be taking most of the abuse. I have applied several coats of Polyurethane Semi Gloss only...
Well friends the day has finally arrived….where I am going to have a decent spot to either carry or hold my stanely chisels….lol. I have had these chisels on one table or another realizing that they needed a proper home in the shop. I thought since I was putting together this traveling tool tote of carpentry instruments….chisels would be well in order for many a task…....so I took a creative chance on making a space for them! Along with that I thought why not a hand...
- My Journey As A Creative Designer - Woodworking and Beyond - 1752 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 109 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Toy costruction - 87 parts
- Life as an Amateur Woodworker - 80 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- Sheila Landry (scrollgirl) - 1777 entries
- dbhost - 428 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 250 entries
- Betsy - 228 entries
- stefang - 221 entries
- robscastle - 219 entries
- Dave Rutan - 218 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 194 entries
- A Slice of Wood Workshop - 192 entries